Cherry tree wood surfaces
with an antique effect simulating traces of use
Cherry tree wood surfaces
with an antique effect simulating traces of use
Our Cherry tree antique effect involves a combination of different surface products. The use of Patina and Wiping stain with a special sanding technique enables this effect to simulate a piece of furniture that has aged over centuries. This special character is intensified by the simulated traces of use and wormholes.
Fields of application : Living room furniture, object furnishings in cherry tree wood, especially furniture made from solid wood.
How to – Cherry wood, antique with signs of use
Sample process:
Cherry dining table, solid
- Solid cherry substrate material
- Introduce signs of use, wormholes, etc. using nails, chisels, etc.
- Wood-sanding grain 150 - 180
- Stain with one coat of precious wood stain BE 63-21997, without wiping
- Dry for at least 3 hours at room temperature 20 °C
- Apply two coats of MEGA-PUR primer DG 4717-0005, sanding between coats mixing ratio (by volume) 5 : 1 with PU Hardener DR 4070 + at least 10 % PU Thinner DV 4900
- Dry for at least 16 hours at room temperature 20 °C
- Spray on one coat of HYDRO Wiping stain TW 4130-8022 and if necessary wipe down afterwards
- Dry for at least 2 hours at room temperature 20 °C
- Effect sanding grain 220 (optionally also coarser) along the texture so that only a little of the wiping stain remains in the pores or in the grooves, sanding grooves or small holes. If stain remains on the surface, this can lead to adhesion problems.
- Apply one top coat of UNA-PUR DE 42599 glossy mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 Dry for at least 16 hours at room temperature 20 °C
Technical information
Cherry wood, antique with signs of use
Products required
Processing and safety informationPlease observe the latest technical information and the material safety data sheets for the stated individual products. Please conduct a test coating under real conditions. Please follow the precise specifications for addition of hardeners and thinners and the drying times included in the effect creation information set out below. Ensure careful stirring or respectively mixing in of all necessary components. NoteThis information is purely advisory and is based on the best knowledge available after careful research in line with current state of the art technology. It is not legally binding. We also refer you to our Terms and Conditions. The material safety data sheet as per regulation (EC) No. 1907/2006 is available.
Contact partner
