Versatile application options
Versatile application options
Description/ features: The colour tone selection and visual perception of our Desert look effect is intended to represent an individual sand texture.
Fields of application : Shops, furniture and interior fittings.
How to – Desert look
Application example:
- Substrate material: Laminated MDF
- Edge and profile sanding: Grit 150 - 180 (dust removal)
- Laminate sanding: Grit 320 - 400 (dust removal)
- Apply EASY-FILL DP 4788-9343 at 150 - 180 g/m², mixing ratio (by volume) 100 : 15 with PU Hardener DR 4096-0002, add 10 % PU Thinner DV 4900 to the lacquer/hardener mixture
- Drying: 5 h / 20 °C, better 16 h / 20 °C
- Primer sanding: Grit 320 - 400 (dust removal)
- Apply PU Structure lacquer DB 46031-8001 at 120 - 150 g/m², mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070, add 10 - 15 % PU Thinner DV 4900 to the lacquer/hardener mixture
- Drying: 5 - 20 min / 20 °C
- Apply PU Structure lacquer DB 46031-8001 at 60 - 100 g/m², mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 using a cup gun with reduced spray pressure (0.5 - 1.0 bar). The spray pressure, selection of spray nozzle size and working viscosity influence the particle size and thus the effect.
- Drying: 30 min / 20 °C
- Apply PU Structure lacquer DB 46031-8008 at 60 - 100 g/m², mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 using a cup gun with reduced spray pressure (0.5 - 1.0 bar). The spray pressure, selection of spray nozzle size and working viscosity influence the particle size and thus the effect.
- Drying: 30 min / 20 °C
- Apply PU Desert look DB 46031-1013 at 60 - 100 g/m², mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 using a cup gun with reduced spray pressure (0.5 – 1.0 bar). The spray pressure, selection of spray nozzle size and working viscosity influence the particle size and thus the effect.
- Drying: 16 h / 20 °C
Technical Information Desert look
Products required
Processing and safety informationPlease observe the latest technical information and the material safety data sheets for the stated individual products. Please conduct a test coating under real conditions. Please follow the precise specifications for addition of hardeners and thinners as set out below. NoteThis information is purely advisory and is based on the best knowledge available after careful research in line with current state of the art technology. It is not legally binding. We also refer you to our Terms and Conditions. The material safety data sheet as per regulation (EC) No. 1907/2006 is available.
Contact partner
