COOLPRO-COLOR HDB 5428x(gloss level)-(colour tone)

COOLPRO-COLOR is a premium, water-based colour lacquer that guarantees extraordinary colour stability and high opacity due to its advanced formulation. The surface features an elegant appearance along with excellent resistance to water, scratches and chemicals. COOLPRO-COLOR enables direct coating onto well finished and sanded MDF surfaces edges that have been foil-coated ready for lacquering. Optional hardening with HYDRO Hardener HDR 5094 makes it possible to achieve high-quality coatings on glass and expand the field of application for COOLPRO-COLOR.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Processing Instructions

Procedure example

Processing

Airmix
Compressed air spraying

69%sustainable

water 53%
mineral resources 16%
fossil resources 31%

Areas of application

Usable on most furniture and interior fittings in kitchen and bathroom areas, with the exception of kitchen worktops and washbasin tops.

Technical information

PDF

COOLPRO-COLOR HDB 5428x(gloss level)-(colour tone) 2 MB

Sustainability data sheet

PDF

COOLPRO-COLOR HDB 5428x(gloss level)-(colour tone) 896 KB

Certificates

Technical Specifications

Appearance	opaque
Number of layers (max)	2
Quantity per layers (min)	100 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	300 g/m²
Mixing ratio (volumetric)	20 : 1 \| Hardener: HDR 5091
Mixing ratio (gravimetric)	100 : 5 \| Hardener: HDR 5091

Processing Instructions

Potlife	2 h / 20 °C
Drying	6 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)	120 - 400
Intermediate sanding (grain size)	320 - 600
Yield per pass	m²/l
Processing information	The maximum processing time for Hesse COOLPRO-COLOR is 2 h / 20 °C. Exceeding this time limit can result in damage to the material supply lines and the spray gun.Add the hardener in a fine stream while stirring. Then adjust the spray viscosity by adding water or HYDRO Optimizer HZ 70. Maximum added quantity 5 %. The hardener must always be added before dilution! Never store any material mixed with hardener in closed packaging. Use water to clean work tools. Use Hesse HYDRO Cleaning agent HV 6917 to remove any dried lacquer residues. Use Hesse HYDRO Reversing agent HV 6904 to rinse out combined application devices (those used for both HYDRO and solvent-based lacquers).
Special notes	Pre-priming is possible depending on the substrate and desired surface, for instance using COOL-FILL HP 6645-9343 / HP 6645-9005, PERFECT-FILL HDP 5650-9343 / HDP 5650-9005.COOLPRO-COLOR can also as necessary be coated directly onto well finished and sanded MDF edges (280 – 320 grit). The lacquer processor should follow the manufacturer information on EU Standard EN 622-5 Point 4 Test Method EN 317 (Requirements for thickness swelling) when selecting a suitable MDF quality for the field of application.It is advisable to use HYPERION TD 130 to prevent yellowing when using light colour tones of COOLPRO-COLOR on content-rich woods like oak or ash. Exotic woods or extremely resinous knotty pine should be primed in advance using transparent PU Isolating primer DG 4720-0001. A trial coating may be required. Hevea brasiliensis should be isolated in advance using COOL-PROTECT HI 6600-9343. More detailed information is respectively available via HYPERION TD 130, PU Isolating primer DG 4720-0001 and COOL-PROTECT HI 6600-9343.When used on stair (treads), we recommend finishing the coloured lacquer surface with Hesse PERFECT-TOP HDE 5400x(gloss level).COOLPRO-COLOR in a mixing ratio (by volume) 20 : 1 with HYDRO Hardener HDR 5094 can be used as a high-quality glass lacquer. The glass surface should be thoroughly cleaned using HYDRO Glass cleaner HS 6601 prior to application.

Procedure example

Application example 1 (Colour lacquer coatings on foil-coated MDF in colour tone -9016)

Substrate sanding: e.g. 280 grit with subsequent dedusting.

Basecoat: 1 x 200 - 250 g/m² Hesse COOL-FILL HP 6645-9343.

Drying: at least 5 h / 20 °C; better 16 h / 20 °C room temperature with adequate air circulation.

Intermediate sanding: 320 - 400 grit with subsequent dedusting.

Top coat: 1 x 100 - 130 g/m² Hesse COOLPRO-COLOR HDB 54285-9016.

Drying: at least 16 h / 20 °C room temperature and with adequate air circulation.

Complete drying: > 5 d drying and/or storage / 20 °C

Application example 2 (Glass mirror on the wall, coating behind glass in dusty grey)

Substrate preparation: Carefully clean the glass and remove any grease using HYDRO Glass cleaner HS 6601.

Glass coating: 1 x 100 - 140 g/m² Hesse COOLPRO-COLOR Glass colour lacquer HDB-57515-(RAL 7037), mixing ratio (by volume) 20 : 1 with Hesse HYDRO Hardener HDR 5094. Should application be by means of a spaying machine, we recommend adding 5 % water or HYDRO Optimizer HZ 70 to the lacquer/hardener mixture.

Drying: 24 h / 20 °C

Ready for installation or bonding: > 5 d drying/storage at 20 °C.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.