COOL-FILL HP 6645-(colour tone)
This 1C isolating filler is formulated to be thixotropic and have good body. It is therefore ideally suited as a filler for closed-pore surface processes with good ability to stay on vertical surfaces. Acrylate-based COOL-FILL can be machine sanded and can be recoated using both HYDRO colour lacquers and PU colour lacquers. COOL-FILL HP 6645-9343 in combination with HB 65285-(colour tone) is certified under “Dubai Green Building” and classified as flame retardant under DIN EN 13501-1.
Enquire articlePage content
- powerful filling
- thixotropic
- fast-drying
- can be recoated using other lacquer systems (such as PU)
- low-flammable according to DIN EN 13501-1 and IMO
Processing
Airmix
Compressed air spraying
Areas of application
For all interior fittings in living areas, on an extremely wide range of wood types, priming foils and MDF, and MDF including edges. For furniture surfaces throughout all interiors including ship interior fittings; for stairs, doors, ledges, etc.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | opaque |
|---|---|
| Decopaint base | wb |
| Decopaint category | I |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 120 g/m² |
| Quantity per layers (max) | 300 g/m² |
| Total quantity applied | 600 g/m² |
Processing Instructions
| Drying | 2 h / 20 °C |
|---|---|
| Due to hardening | 1 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 400 |
| Intermediate sanding (grain size) | 280 - 400 |
| Yield per pass | 8 - 9 m²/l |
| Processing information | When directly coating cleaned or sanded foils, please apply a test coat to check the bonding! Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7 and IMO Resolution MSC.97(73)-(2000 HSC-Code) 7. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 150 g/m².By adding up to 5% COOL-COLOR colour lacquer or HYDRO colour pastes, the COOL-FILL can be coloured in pastel shades if required. Please note that this can have an influence on the rheology, the covering/filling power and the polish. |
| Special notes | Woods rich in active substances, such as ash, which tend to discolour when coated with pastel-coloured HYDRO colour systems should always be pre-treated with dual-component primers, such as: COOL-PROTECT HI 6600-9343, PERFECT-FILL HDP 5650-9343. Pre-prime exotic woods such as Macassar ebony or extremely resinous knotty pine with PU Isolating primer DG 4720-0001. “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
COOL-FILL HP 6645-(colour tone)Your request for the series
COOL-FILL HP 6645-(colour tone)
