Antique Pre-Stain WAV 58-(colour tone) for spraying

HYDRO stains are used as special stains to achieve an antique effect on porous or highly textured woods. Unique stain finishes can be obtained by combining them with a WAV antique stain, which can for instance be used to create a weathered surface.

Enquire article

Page content

Product features

Areas of application

Technical information

Technical Specifications

Processing Instructions

Procedure example

Highlights

Antique stains that are easy to apply
For exclusive unique items
to achieve a weathered look to your wood surface
System build-up using 2 stains

Processing

Airmix
Compressed air spraying

Areas of application

Use in parquet, furniture for interior decoration and interior fittings. This stain is formulated to spray without wiping. Specifically formulated for conifers.

Technical information

PDF

Antique Pre-Stain WAV 58-(colour tone) for spraying 1 MB

Technical Specifications

Appearance	glazing
Number of layers (max)	1
Quantity per layers (min)	30 g/m²
Quantity per layers (max)	60 g/m²
Total quantity applied	60 g/m²

Processing Instructions

Drying	3 h / 20 °C
Surface sanding (grain size)	120 - 180
Intermediate sanding (grain size)
Yield per pass	20 - 39 m²/l
Processing information	An even, slightly damp spray application without wiping. Once the WAV pre-stain has dried, sand it for effect with a 150 grit abrasive sponge until the hard growth rings are raised. Then spray with WA post-stain and lightly wipe it, depending on the desired effect. Substrate treatment: use Andalon brushes to deeply texture solid pine, knotty pine and spruce (possibly oak) or slip matched veneers that are a minimum of 0.7 mm, preferably 1 mm thickness. Stir stains well before and during processing. The stains can be thinned with water, if required.
Special notes	Can be tinted with colour concentrates in the range: BP 30xx, BP 3570. All stains from the same range can be mixed with one another.

Procedure example

Contract installation in pine with weathered knots Wood preparation: deeply textured with Andalon brushes Staining: with 1 x 100 - 120 g/m² Hesse Antique pre-stain WAV 58-20500 applied damp without wiping Intermediate drying: at least 3 h / 20 °C Lacquer sanding: with a grit 150 abrasive sponge Staining: 1 x 60 - 80 g/m² - Hesse antique stain WA 58-20506 applied damp without wiping Intermediate drying: for at least 3 h / 20 °C Coating with 2 x 100 - 120 g/m² Hesse PU Natural wood effect DA 400-1, mixing ratio 10 : 1 with PU Hardener DR 470 Intermediate drying: for at least 2 h / 20 °C Lacquer sanding: grit 320 packable after drying for a minimum of 16 h / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.