EASY- FILL DP 4788-9343
EASY-FILL is a very well-bodied PU Isolation primer. Its high thixotropy makes this product exceptionally suitable as a primer for application on vertical surfaces and three-dimensional components beneath Hesse colour lacquers. EASY-FILL can be impressively sanded by hand or by machine even after brief drying and therefore supports fast, process-oriented production times.
Enquire articlePage content
- excellent ability to stay on vertical surfaces
- very good body
- fast drying
- easy to sand back by hand and machine
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
Areas of application
EASY-FILL can be used for shopfitting and all interior fittings, including those in kitchens and bathrooms. We recommend PU Isolation primer DP 4791-9343 for professional use beneath high gloss.
Technical information
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | opaque |
| VOC EU % | 34,8 % |
| Number of layers (max) | 4 |
| Quantity per layers (min) | 140 g/m² |
| Quantity per layers (max) | 300 g/m² |
| Total quantity applied | 500 g/m² |
| Mixing ratio (volumetric) | 100 : 15 |
| Mixing ratio (gravimetric) | 100 : 10 |
Processing Instructions
| Drying | 3 h / 20 °C |
|---|---|
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 320 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 5 - 10 m²/l |
| Processing information | Application of between one and four coats at 100 - 300 g/m² on suitable substrates. The maximum application amount in wet film is 500 g/m². |
| Special notes | Any addition of thinner in relation to the lacquer/hardener mixture is subject to various factors and has to be individually adapted to the component being coated as well as to the climatic and mechanical conditions. In the case of FANTASTIC-FILL, an addition of 0 - 30 % is possible.A mixing ratio (by weight) of 10 : 1 or a mixing ratio (by volume) of 100 : 15 equates to a mixing ratio (by volume) of 7 : 1 given the graduation on commercial mixing jugs. [This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is] 140 g/m². “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
EASY- FILL DP 4788-9343Your request for the series
EASY- FILL DP 4788-9343
