HYDRO Adhesion primer HDG 5701

Colourless, fast drying and NCO-free HYDRO Adhesion primer for spray application. As a primer for subsequent digital printing or other individual glass coatings. Also suitable for industrial applications, given that it can be force dried.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Technical Specifications

Processing Instructions

Procedure example

Highlights

Adhesion primer on glass for digital printing
NCO-free
fast-drying
forced drying is possible

Processing

Compressed air spraying
other treatment

70%sustainable

water 69%
mineral resources 1%
fossil resources 30%

Areas of application

For decorative glass coatings on all interior fittings in shopfitting and living areas.

Technical information

PDF

HYDRO Adhesion primer HDG 5701 1 MB

Sustainability data sheet

PDF

HYDRO Adhesion primer HDG 5701 478 KB

Technical Specifications

Proportion of renewable raw materials %	0 %
Appearance	not relevant
Decopaint base	wb
Decopaint category	J
VOC EU %	3 %
Number of layers (max)	1
Quantity per layers (min)	20 g/m²
Quantity per layers (max)	100 g/m²
Total quantity applied	100 g/m²
Mixing ratio (volumetric)	100 : 3 \| Hardener: HDR 5002
Mixing ratio (gravimetric)	100 : 3 \| Hardener: HDR 5002

Processing Instructions

Surface sanding (grain size)
Intermediate sanding (grain size)
Yield per pass	10 m²/l
Special notes	HDG 5701 can also be used as an adhesion primer on aluminium for subsequent HYDRO finishes. The following applies to all areas of application: please prepare practical test finishes on original substrate material to check whether the properties of the overall finish meet your individual requirements!

Procedure example

Digital print on glass

Surface preparation: carefully clean and remove grease from the glass using the likes of Hesse Cleaning agent HS 6601.

Spray application: 1 x 100 - 130 g/m² Hesse HYDRO Adhesion primer HDG 5701, mixing ratio (by volume) 100 : 3 with Hesse HYDRO Crosslinker HDR 5002

Drying: 24 h / 20 °C or forced drying (UL, IR drying, cooling) at temperatures up to 80 °C.

Subsequently add the customer-specific digital print.

Then, if necessary, fix with 1 x 100 - 120 g/m² HYDRO-PU Glass lacquer HDU 57109, mixing ratio (by volume) 100 : 3 with Hesse HYDRO Crosslinker HDR 5002

Drying: circa 16 h / 20 °C or forced drying (UL, IR drying, cooling) at temperatures up to 80 °C.

Mounting or gluing: after at least 5 d drying/storage at 20 °C.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.