PERFECT-NATURA-BASE HDG 5410
Special clear HYDRO-PU acrylic primer for combination with PERFECT-NATURA HDE 54500 and PERFECT-NATURA bright HDE 54510. The product is preferably used on Oak and for open-pored applications. Methylpyrrolidone-free and free of phthalate plasticizers, therefore also suitable for coating children's toys.
Enquire articlePage content
- Basecoat natural wood effect, preferably on oak
- equalising
- elegant pores accentuation
- meets the See-BG / IMO test certificate
Processing
Airless
Airmix
Compressed air spraying
Areas of application
Single application as a primer, preferably on woods rich in substances, in combination with PERFECT-NATURA HDE 54500 and PERFECT-NATURA bright HDE 54510. In the complete field of interior fittings to preserve the natural wood color; mainly on coarse pored woods such as ash and Oak. Can also be used for stairs and handrails as well as on bleached surfaces (sufficiently dried).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 8,2 % |
| Number of layers (max) | 1 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 120 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: HDR 5091 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: HDR 5091 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 2 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 220 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 9 m²/l |
| Processing information | Add hardener slowly whilst stirring. Adjust the spray viscosity with water if required. Maximum additive volume 5 %. The hardener must always be added before thinning! Never store product mixed with hardener in closed containers. Over-paintability: possible with another coat of the same product or with suitable colourless materials. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
| Special notes | Do not sand through the material! The PERFECT-NATURA-BASE HDG 5410 primarily prevents the reaction of the HYDRO lacquer with the tannic acid of the Oak and thus the unwanted discoloration of the wood. The primer has no brightening effect, but can be individually adjusted by the user with the HYDRO brightening agent BZ 440 (maximum addition of 3 % in relation to the lacquer) depending on the type of wood. The desired natural wood effect is only fully formed after finishing the dried primer with PERFECT-NATURA HDE 54500 or PERFECT-NATURA bright HDE 54510.Overcoatability e.g. with HDE 5400x(gloss level) or HDE 54799 after sufficient drying and proper polish.When used as a low-flammable coating for seagoing vessels according to SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, latest version, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Rundschr. 1120, this product can only be combined with other approved and technically suitable products. The maximum wet application rate when using this product as a low-flammable coating for seagoing vessels is 100 g/m²."A risk assessment has been carried out in accordance with Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating does not present a physical, health or environmental hazard." |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PERFECT-NATURA-BASE HDG 5410Your request for the series
PERFECT-NATURA-BASE HDG 5410
