PERFECT-TOP HDE 5400x(gloss level)
PERFECT-TOP ist ein zweikomponenten HYDRO-PUR Acrylat-Schichtlacksystem mit hervorragender mechanischer und chemischer Beständigkeit. Die gute Anfeuerung und Brillanz, gepaart mit der sehr guten Creme- und Handschweißbeständigkeit, machen dieses System zum hochwertigen Oberflächenschutz im gesamten Innenausbau. Aufgrund der besonderen Rezeptierung ist dieser Lack auch für eine knarrfreie Beschichtung von Holztreppen geeignet.
Das bereits mit Lichtschutz formulierte Lackmaterial ist nach IMO zertifiziert (schwerentflammbares Anstrichmittel für Seeschiffe) und eignet sich somit für die Lackierung von Schiffsinneneinrichtungen. Methylpyrrolidonfrei und frei von Phthalatweichmachern, deshalb auch zur Lackierung von Kinderspielzeug geeignet. Außerdem Schwerentflammbar nach DIN EN 13501-1 zertifiziert.
Enquire articlePage content
- Very good chemical and mechanical resistance
- good accentuating of the wood substrate
- Monomer-free standard hardener
- EN 71-3
Processing
Airless
Airmix
Compressed air spraying
- 2C line
-
Airless low pressure
-
other treatment
Automatic spray gun
Areas of application
In the entire interior, including kitchen and bathroom, as well as for painting the interior of ships. Also suitable for coating content-rich woods (e.g. ash, oak, pine, etc.), as well as stairs and handrails. Can also be used for finishing suitable colour lacquer surfaces and on (sufficiently dried) bleached surfaces.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | colourless |
|---|---|
| Decopaint base | wb |
| Decopaint category | J |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 130 g/m² |
| Total quantity applied | 260 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: HDR 5091 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: HDR 5091 |
Processing Instructions
| Drying | 4 h / 20 °C |
|---|---|
| Due to hardening | 24 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 220 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 8 m²/l |
| Processing information | Once the hardener is well worked in, adjust the spray viscosity with up to 5 % water. The hardener must always be added before thinning with water! Never store product mixed with hardening agent in closed containers. Recoatability: with itself following proper sanding. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
| Special notes | In order to prevent bleeding of wood types with a high content of substances such as exotic woods or smoked Oak, we recommend the combined use of PERFECT-NATURA-Base HDG 5410 for open-pored coatings or PERFECT-Base HDG 5407 for closed-pore coatings together with PERFECT-TOP HDE 5400x(gloss level). Please note that a test coating is necessary if required!For finishing suitable colored surfaces, the PERFECT-TOP with up to 10 % PERFECT-COLOR HDB 5434x(gloss level) can be tinted.If required, the processing time and pot life of PERFECT-TOP can be extended to approx. 4 hours at 20° C by adding approx. 15% water or approx. 5% Optimizer HZ 70. The resulting lower flow time and change in rheology must be taken into account.When used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code) 7, IMO Resolution MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ. 1120, this product can only be combined with other approved and technically suitable products. The maximum wet application rate when using this product as a low-flammable coating for seagoing vessels is 240 g/m²."A risk assessment has been carried out in accordance with Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating does not present a physical, health or environmental hazard."After adding 10 % Hesse Additive HZ 75 to the last coat of lacquer, slip resistance class R10 according to German Industrial Standard 51130 is achieved. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PERFECT-TOP HDE 5400x(gloss level)Your request for the series
PERFECT-TOP HDE 5400x(gloss level)
