Priming stain BG (colour tone) for spraying and wiping off
Hesse Priming stains BG combine pigment and dyestuff properties in a beneficial manner: the brilliance and luminosity of the dyestuffs are complemented by the levelling capacity and enhanced light fastness of the pigments. The emphasis of the pores can also be influenced at the same time. The result is a brilliant to slightly muted stain appearance without prominent emphasis of the pores. The colour tone to be achieved depends on the type of wood.
Enquire articlePage content
- Stain appearances range from brilliant to muted
- Can be used on many woods
- HYDRO lacquers can be applied as the next coat
Processing
Compressed air spraying
Airless low pressure
Airmix
Wiping with a cloth
Spreading
other spraying methods
-
Airless
Automatic spray gun
-
Gauze pads / cloth
-
other treatment
Dipping
Spraying robot
- water 98%
- mineral resources 1%
- fossil resources 1%
Areas of application
For staining with subsequent over-painting in industry and handcrafting of furniture, stairs and doors.
Technical information
Sustainability data sheet
Technical Specifications
| Appearance | glazing |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 30 g/m² |
| Quantity per layers (max) | 60 g/m² |
| Total quantity applied | 60 g/m² |
Processing Instructions
| Drying | 2 h / 20 °C |
|---|---|
| Surface sanding (grain size) | 120 - 180 |
| Intermediate sanding (grain size) | |
| Yield per pass | 18 - 37 m²/l |
| Processing information | Spray the stain to form excess. Stir stains well before and during processing. Alternatively it can also be worked with a brush or sponge. Wipe evenly with a wiping brush after applying the stain. We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are advisable when spraying stains that are subsequently to be wiped. |
| Special notes | Hesse stains are matched to each type of wood in terms of colour tone and processing. Further application methods are possible. All stains from the same range can be mixed with one another. Lighten by adding water. Can be tinted with colour concentrates in the range: BP 30xx and BP 3570 NEW. Discolorations may arise due to priming with HYDRO Lacquers on woods with a high proportion of soluble wood contents (such as oak). We therefore recommend a PU Basecoat, particularly in the case of pastel or white colour tones. Spraying with wiping is used in preference on coarse-pored woods like oak, ash or mahogany. The copious excess and its subsequent incorporation by means of wiping with a brush provides better wetting of the pores. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
Priming stain BG (colour tone) for spraying and wiping offYour request for the series
Priming stain BG (colour tone) for spraying and wiping off
