PU Multicoat lacquer DE 4252x(gloss level)
Two component PU acrylic resin lacquer, full-bodied, clear and light fast. A multicoat lacquer for priming and top coating with very high resistance, particularly to mechanical stresses. This product is free from phthalate softeners and therefore also suitable for coating children's toys.
Enquire articlePage content
- Good filling power
- Very high mechanical resistance
- formulated with light protection
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- water 1%
- renewable resources 1%
- mineral resources 5%
- fossil resources 93%
Areas of application
For all interior fixtures and fittings. Can also be diluted for application as MDF edge isolation.
Technical information
Certificates
Technical Specifications
| Appearance | colourless |
|---|---|
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 400 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 10 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 3 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 6 - 10 m²/l |
| Special notes | For use as MDF edge sealant under coloured coating systems. Dilute the lacquer/hardener mixture for the PU Multicoat lacquer DE 4252x with 20 - 30 % DV 4900. Apply another coat on the very same day, after prior sanding with grit 320 - 400. This product only has limited suitability for top-coating coloured surfaces. Complete resistance to ring stains is not achieved on account of the slightly abrasive surface texture. For this we recommend the use, for example, of a PU Multicoat lacquer from the DE 4259x(gloss level) range or a PU Multicoat lacquer from the DE 4503x(gloss level) range.At hardening, mixing 5 : 1 PU hardener DR 4070 with PU Multicoat lacquer DE 4252x(gloss level) increases abrasion resistance and additionally enables use even on bleached surfaces. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Multicoat lacquer DE 4252x(gloss level)Your request for the series
PU Multicoat lacquer DE 4252x(gloss level)
