WETPROTECT-OIL OE 52068
WETPROTECT-OIL is a mixture of natural oils and natural oils modified with alkyd resins. This thin-bodied oil has excellent penetration properties and produces superb grain accentuation. It impregnates the wood fibres particularly well and thus better protects the substrate against the effects of moisture. It is therefore particularly suitable as an additional, first impregnation layer in combination with other high quality oils, especially when used in kitchens, bathrooms and other moist environments. This product is not classified according to the CLP Regulation and is only formulated with cobalt- and lead-free siccatives and carefully selected mild smelling solvents. It does not contain fungicides or herbicides.
Enquire articlePage content
- optimised protection against moisture penetration
- first impregnation layer, even for use in kitchens, bathrooms and other moist environments
Processing
Wiping with a cloth
Areas of application
Anywhere indoors where good moisture resistance on an oiled surface is desired, such as in kitchens, bathrooms and other moist environments. Surface treatment of wood in interior areas, e.g. parquet and surface coating, living room and bedroom furniture, children's furniture, wall and ceiling panelling. Additionally suitable for heavy-duty use on parquet and wooden floors in residential and commercial areas. Also for stairs, handrails, oriented strand boards and cork floors. Suitable for coating surfaces on children's toys.
Technical information
Sustainability data sheet
Technical Specifications
| Proportion of renewable raw materials % | 59,39 % |
|---|---|
| Appearance | colourless |
| Decopaint base | Lb |
| Decopaint category | I |
| VOC EU % | 34,3 % |
| Number of layers (max) | 1 |
| Quantity per layers (min) | 15 g/m² |
| Quantity per layers (max) | 50 g/m² |
| Total quantity applied | 50 g/m² |
Processing Instructions
| Drying | 6 h / 20 °C |
|---|---|
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 120 - 180 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 18 - 59 m²/l |
| Processing information | It is preferable to apply 1 generous coat of WETPROTECT-OIL on the expertly prepared surface. Allow an absorption period of 5 - 10 min / 20 °C room temperature and then rub the oil in well using a fine pad or the like. Subsequently remove any excess using something like a lint-free cotton cloth until the surface appears evenly dry. The next layer of suitable oil can be applied after a drying time of around 6 h, preferably 16 h / 20 °C room temperature.Even 2 coats of WETPROTECT-OIL can be applied if required. This increases the wood’s water resistance. |
| Special notes | Please note the latest version of the Safety Data Sheet! The material dries with oxidation – please observe the general application instructions. A skin can form on open containers due to the spontaneous reaction of the product with atmospheric oxygen! Please check before application! This skin cannot be incorporated, but must be carefully removed and disposed of before application. We recommend that you also sieve the material before applying it.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”Ensure that the temperature is high enough (20 °C) and that there is sufficient air circulation when applying! Large areas should be coated by two people. Rapid rolling prevents deposits; apply in the direction of the wood. Skin may form due to the high reactivity. Please remove before agitating. Subsequently the material should be filtered as a precaution. Stir carefully before use. Please observe the latest material safety data sheet! The product is not suitable for woods susceptible to blue stain in damp rooms. The material properties were tested on commercially available wood such as oak, beech, etc. Please check suitability before using on other types of wood. Please apply a test coat under real conditions! |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
WETPROTECT-OIL OE 52068Your request for the series
WETPROTECT-OIL OE 52068
