Marble effect

 Step 1:  

• Sand down priming foil, laminated chipboard or MDF surfaces well
• Prime with one coat of 150 - 200 g/m² FANTASTIC-FILL mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 thinned with 15 % PU Thinner DV 4900
• Dry for at least 16 hours at 20 °C
• Sand with 280 - 320 grain
• Apply one or two coats of 100 - 150 g/m² UNA-COLOR DB 45245-(colour tone) in the base colour tone mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070
  thinned with 10 % PU Thinner DV 4900
• Dry for at least 16 hours at 20 °C
• Sand until slightly smooth (grain 400)

Step 2:  

• Apply UNA-COLOR DB 45245-(colour tone) in the desired marbling colour tones mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070
  dilute in a marbling mixture of 1 : 5 with PU Thinner DV 4900 and patinate in irregular lines of 3 -10 g/m² at a distance of 15 - 20 cm with the cup gun (circular jet)
• Moisten crumpled-up parchment paper or a natural sponge with marbling effect solution DV 4991 and dab on the patinated surface
• Dry for 1 - 2 hours

Step 3:

• Apply one finishing coat of 100 - 150 g/m² UNA-PUR DE 4259x(gloss level) mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070
• Dry for at least 16 hours at 20 °C
• or
  apply two finishing coats of 100 - 120 g/m² FANTASTIC-BRILLANT DU 48799, leaving 10 - 60 mins. between coats mixing ratio (by volume) 4 : 1 with PU Hardener DR 4071 thinned with 20-30 % PU Thinner DV 4935

If required, FANTASTIC-BRILLANT DU 48799 can be polished to a high gloss for > 48 h / 20 °C.

• The marble effect gives each surface a unique appearance; the user should become familiar with the specific technique prior to application.
• PU lacquers should not be processed and dried at material/ room temperatures below 18 °C.
• Please sand back PU lacquered surfaces before applying fresh lacquer, and coat the sanded surfaces as soon as possible to avoid adhesion problems.
• Final hardness of the coating is achieved after one week in correct storage conditions (at least 20 °C room temperature).
• Please apply a test coating under real conditions!