1K PU coat DE 41-x(gloss level)

Single-component, aromatics-free PU sealer that reacts with ambient humidity to form an extremely resistant protective film that has a good body and is highly abrasion and wear-resistant. A multi-coat lacquer for priming and top coating with very good resistance to chemical and mechanical demands.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

high filling power
particularly hard-wearing
particularly abrasion resistant

Processing

Airless
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

Areas of application

For all interior use.

Technical information

PDF

1K PU coat DE 41-x(gloss level) 2 MB

Certificates

Technical Specifications

Appearance	colourless
Number of layers (max)	3
Quantity per layers (min)	100 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	450 g/m²

Processing Instructions

Drying	16 h / 20 °C
Due to hardening	7 d / 20 °C
Surface sanding (grain size)	150 - 180
Intermediate sanding (grain size)	240 - 320
Yield per pass	7 - 10 m²/l
Processing information	Drying for > 16 h / 20 °C must be observed within the lacquering operations! Our aromatics-free Thinner DV 4981 is recommended for adjusting the viscosity when applying this product using a lacquering roller or brush. Our aromatics-free Thinner DV 4994 should be used to adjust the viscosity for spray application.
Special notes	Do not use the product on light or non-wood stained woods! Use on bleached surfaces is not possible!Air humidity during treatment of at least 50 %. Minimum temperature 18 °C. At lower air humidity and temperature, loss of surface quality is possible. Ensure airtight closure of opened containers immediately after extraction because the contents react with humidity in the air and thicken. Turn the container on its head for a short time. Clean working equipment immediately!

Procedure example

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.