2C HYDRO-PU Brilliant lacquer HDE 54799
Two component HYDRO-PU acrylate lacquer with good body, water soluble, clear, high gloss and with outstanding chemical and mechanical resistance. It can be polished and buffed, PVC-resistant, cream and sweat resistant and light fast. Free from N-methylpyrrolidone and phthalate plasticisers, therefore also suitable for coating children's toys.
Enquire articlePage content
- Good body
- Good transparency
- Light-fast
- outstanding chemical and mechanical resistance
- good polishing and buffing properties
Processing
Airless
-
Airless low pressure
Airmix
Compressed air spraying
Areas of application
For high quality residential furniture with high-demand surfaces and all interior fittings, including those in kitchens and bathrooms. Can also be used on bleached surfaces (that are adequately dry).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 5,931 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 4,1 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 5 : 1 |
| Mixing ratio (gravimetric) | 100 : 21 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 16 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 3 d / 20 °C |
| Surface sanding (grain size) | 320 - 600 |
| Intermediate sanding (grain size) | 400 - 800 |
| Yield per pass | 7 - 10 m²/l |
| Processing information | Work in the hardener well, then Adjustment of the spray viscosity of 20 - 25" (German Industrial Standard 4 mm) with water (approx. 20 %) to avoid reaction foam.Hardener must always be added before diluting! Do not store material mixed with hardener in closed packaging.in closed containers.Always apply only 1 coat with a maximum of 120 g/m² in one application. Do not apply several thin coats with short intermediate drying, as you may be used to with other high-gloss systems.After the first coat of HDE 54799 has dried for 5 - 6 h / 20°C, a second application can be made without Intermediate sanding if required. Lacquer sanding of HDE 54799 is only possible after a drying time of > 16 h / 20°C. We recommend staggered Lacquer sanding with 400 and 600 grit. For dark wood types or color tones, sand in stages up to 800 grit. HYDRO-PU Brilliant lacquer HDE 54799 is suitable for finishing PERFECT-COLOR HDB 54345-(color tone) and on wood types already sufficiently pre-primed with PERFECT-BASE HDE 5407. |
| Special notes | Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
2C HYDRO-PU Brilliant lacquer HDE 54799Your request for the series
2C HYDRO-PU Brilliant lacquer HDE 54799
