What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/EN
COOL-NATURA HE 64500

COOL-NATURA HE 64500

Our COOL-NATURA is a fast-drying, light fast 1C HYDRO Natural wood effect lacquer. Its special gloss level and bare wood feel make it difficult to distinguish the coated surface from that of bare wood. COOL-NATURA can be used on all European woods without any problems, even on bleached surfaces. The finish displays good chemical and mechanical resistance. The high proportion of renewable raw materials and a VOC content of < 3 % mean that it is also suitable for use in sustainable and “green building” projects.

Enquire article
Highlights
  • genuinely feels like real natural wood
  • is as matt as bare wood, even from every viewing angle
  • meets DIN 68861 1c
  • VOC content < 3 %
  • excellent scratch resistance
  • 7 % proportion of renewable raw materials

Processing

  • Airless Airless
  • Airmix Airmix
  • Compressed air spraying Compressed air spraying

Areas of application

COOL-NATURA can be used on all European woods in the complete field of interior fittings, including on furniture, doors, wall and ceiling panelling and other surfaces subject to normal to higher demands. It is also suitable for coating children’s toys.

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Proportion of renewable raw materials % 6,366 %
Appearance colourless
VOC EU % 2,5 %
Number of layers (max) 2
Quantity per layers (min) 70 g/m²
Quantity per layers (max) 90 g/m²
Total quantity applied 180 g/m²

Processing Instructions

Drying 2 h / 20 °C
Surface sanding (grain size) 120 - 220
Intermediate sanding (grain size) 280 - 320
Yield per pass 11 - 14 m²/l
Processing information Please stir this material well before use! COOL-NATURA can as necessary be diluted with up to 5 % water directly before processing. One or two coats of COOL-NATURA should be applied onto appropriately prepared wood substrates. The COOL-NATURA lacquer layer should not be sanded through or otherwise damaged when finishing with other HYDRO material (risk of stain formation). Please check the appearance and feel of the finished surface based on a trial coating on the original substrate.
Special notes “A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when hardened and dried.”

Procedure example

Solid oak

Wood sanding: 120 - 150 grit

Basecoat: 1 x 70 - 80 g/m² COOL-NATURA HE 64500

Drying: at least 2 h / 20 °C room temperature with sufficient air circulation

Intermediate sanding: 400 - 600 grit

Top coat: 1 x 70 - 80 g/m² COOL-NATURA HE 64500

Drying: at least 16 h / 20 °C room temperature with sufficient air circulation

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
COOL-NATURA HE 64500

Request a series

COOL-NATURA HE 64500?
Back to product overview