CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone)
CREATIVE-METALLIC colour lacquer can be used to create unique pieces for interior fittings and on furniture and doors. Produce the most beautiful metallic effects with coarse to fine metallics, from silver, copper and gold colour tones through to modern, bright metallics. The associated CREATIVE-METALLIC colour chart displays 112 different colour tones that depict the full diversity of this system. All of the lacquers in this range can of course also be mixed with one another for a virtually limitless variety of effects.
Enquire articlePage content
Highlights
- Application on wood materials and glass
- A colour chart with 112 colour tones is available for your customer conversations
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
Areas of application
This fast-drying lacquer system has been developed especially for interior fittings and shop fitting. The coating of furniture and doors represents an additional benefit. The same lacquer can also be used for decorative glass coating on elements like glass doors, shower partitions and glass within furniture.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | opaque |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 120 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 9 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 16 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 320 |
| Intermediate sanding (grain size) | |
| Yield per pass | 9 m²/l |
| Processing information | A single layer application of 80 - 120 g/m² in the spraying process is recommended for CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone). Formation of the effect and colour tone is largely dependent on the working method, application quantity and substrate condition. DB 4655x(gloss level)-(colour tone) should not be applied too wet to enable a uniform effect to be achieved. We therefore recommend the use of smaller nozzles (1.2 - 1.5 mm) when using a cup gun for application. The spray nozzle sizes specified under "Application" in this Technical Information are default values for Metallic lacquers. A trial coating should be performed as required!Use of Thinners: For smaller surface areas we recommend our PU Thinner DV 4900, and DV 4994 for larger surface areas. The quantity to be added to the lacquer/hardener mixture is around 10 - 40 % depending on the colour tone, effect and component.Use of alternative hardener: supplementary to hardening with PU Hardener DR 4070, it is also possible to use our PU Hardener DR 4071 in a mixing ratio (by volume) 10 : 1.Gold and copper colour tones: it is best to use lower coating thicknesses (50 - 70 g/m²) to obtain ideal brilliance when working with colour tones in the GD and CU series. Fine sanding and polishing of the substrate is advisable. Parallel surfaces with the "Sanded-Metallic" effect can be achieved on coarsely sanded substrates (80 - 180 grit). Please refer to the technical information on our homepage.Coating glass: coating glass cleaned using Cleaning thinner ZD 101 requires the use of our PU Hardener DR 4076-0001 in a mixing ratio (by volume) 5 : 1. The application quantity is 130 - 160 g/m². An application quantity of 80 - 120 g/m² is advisable when using gold and copper colour tones. The processing time for DB 4655x(gloss level)-(colour tone) when hardened using PU Hardener DR 4076-0001 is 5 - 6 h / 20 °C. Coated panes of glass can be glued after storing for 7 d / 20 °C.Coating on sheet steel or stainless metal: after careful degreasing using PU Thinner DV 4900 or DV 4994, then DB 4655x(gloss level)-(colour tone) in a mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 can be used to coat sheet steel or stainless metal. Polishing of the steel sheet or metal surface additionally improves the adhesion of DB 4655x(gloss level)-(colour tone). The user should independently apply a test coat and finally approve it by means of a cross-cut test. Please feel free to contact your relevant Hesse sales representative in case of need. |
| Special notes | CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone) can be recoated using a transparent PU lacquer to optimise its chemical and mechanical resistance and to create individual gloss levels. When doing this, please follow the instructions in the “Final treatment” section of this Technical information. Materials from the same range can be mixed with each other. Pre-priming is possible depending on the desired surface and substrate, e.g. using Isolating fillers DP 4791-9343, DP 4755-9343 and DP 4788-9343. The colour tones portrayed in the colour fans may deviate from the actual coating result. Different application methods and substrates are instrumental in generating the effect. The colour tone can also evolve somewhat differently than depicted when using clear top coats and when coating behind glass. It is therefore advisable to conduct a trial coating and sampling. We recommend the use of a soft duster for normal dry buffing. Microfibre or leather cloths are suitable for damp cleaning. Moisten the cloth with water, wring it out and damp clean. Harsh household cleaners or abrasive substances are not suitable!This product exclusively with gloss levels x = 0, 1, 2, 3, 4, 5 must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 120 g/m². This does not apply to application on glass and metal!“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
General Notes / Disclaimer
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request article and material safety data sheet
CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone)
Request a series
CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone)?
<%# lists %><%/ lists %>
<% headline %>
<%# list %><% fileType %><%/ list %>
<% name %><% size %>
Your request for the article
CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone)Colour shade:
Product number:
Packaging size:
Your request for the series
CREATIVE-METALLIC DB 4655x(gloss level)-(colour tone)
Back to product overview
