What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/EN
FANTASTIC-NATURA DA 48660

FANTASTIC-NATURA DA 48660

FANTASTIC-NATURA is a solvent-based, non-scorching, scratch-resistant PU natural wood effect varnish. The free of aromatic substances and light fast multicoat lacquer can be used on both light-coloured and bleached wood. The natural character, wood feel and wood colour tone remain almost unchanged. Application on dark-coloured wood is also possible and gives the surfaces a cool, dull matt appearance. FANTASTIC-NATURA achieves exceptionally good chemical and mechanical resistance thanks to its high degree of cross-linking.

Enquire article
Highlights
  • Remarkable raw wood effect on brightening woods, especially Oak
  • formulated without aromatic solvents
  • exceptionally good chemical resistance
  • official A+ certificate
  • TOY EN71-3 standard

Processing

  • Airmix Airmix
  • Compressed air spraying Compressed air spraying
  • Automatic spray gun Automatic spray gun

Areas of application

FANTASTIC-NATURA can be used on almost all indoor wooden furniture, as well as on carcasses and kitchen cabinet fronts. It can also be used as a lightening basecoat in combination with Hesse FANTASTIC-CLEAR in the four different gloss levels or with FANTASTIC-CLEAR ULTRAMATT, for example.

Technical information

Sustainability data sheet

Technical Specifications

Proportion of renewable raw materials % 0,734 %
Appearance colourless
VOC EU % 86,5 %
Number of layers (max) 2
Quantity per layers (min) 100 g/m²
Quantity per layers (max) 150 g/m²
Total quantity applied 300 g/m²
Mixing ratio (volumetric) 10 : 1 | Hardener: DR 4071
Mixing ratio (gravimetric) 100 : 11 | Hardener: DR 4071

Processing Instructions

Potlife 8 h / 20 °C
Drying 2 h / 20 °C
Due to hardening 7 d / 20 °C
Stackable according to 16 h / 20 °C
Surface sanding (grain size) 120 - 180
Intermediate sanding (grain size) 280 - 320
Yield per pass 6 - 9 m²/l
Processing information Hardening of FANTASTIC-NATURA in a mixing ratio (by volume) of 10 : 1 with PU Hardener DR 4071 is recommended! However, FANTASTIC-NATURA can optionally be processed in a mixing ratio (volume) of 10 : 1 with PU Hardener DR 4070. When hardening with DR 4070, we do not recommend coating wooden surfaces in damp rooms or kitchens. A slight deviation in the brightening effect in the hardening between DR 4071 and DR 4070 cannot be ruled out. A hardener type should therefore be agreed within a project.For the application of FANTASTIC-NATURA on dark wood species, a higher addition of thinner (20% DV 494 / DV 4994 in relation to the base coat) is recommended. We recommend the use of DV 4935 thinner for application via the Spaying machine. Screening with < 75 µ of FANTASTIC-NATURA has a negative influence on the natural wood effect.When used as a low-flammable coating for seagoing vessels according to SOLAS 74/88 Reg. II-2/3, II-2/5 and II-2/6, latest version, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, this product can only be combined with other approved and technically suitable products. The maximum wet application[1] rate when using this product as a low-flammable coating for seagoing vessels is 250 g/m². This product is only suitable as a low-flammable coating for seagoing vessels in the standard hardening, not with the optional hardenings!
Special notes Adding max. 2 % SUN-EX ZD 9501 Light protection agent in relation to the base lacquer can be effective in delaying wood discolouration due to UV radiation.FANTASTIC-NATURA must be stirred carefully before mixing with hardener. We also recommend stirring FANTASTIC-NATURA mixed with hardener after a longer processing pause! A combination build-up with Hesse Natural Wood Effect DE 42900-0003 / DA 400-1 and FANTASTIC-NATURA is not possible!“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”

Procedure example

Type of wood: solid oak

Wood sanding: 120 - 150 grit

Basecoat: 1 x 100 - 130 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 and the addition of 10 - 20 % Thinner DV 494 / DV 4994 in relation to the lacquer/hardener mixture

Intermediate drying: > 2 h / 20 °C

Lacquer sanding: 320 - 400 grit

Top coat: 1 x 100 - 130 g/m² FANTASTIC-NATURA DA 48660, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 and the addition of 10 - 20 % Thinner DV 494 / DV 4994 in relation to the lacquer/hardener mixture

Packable: after at least 16 h / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
FANTASTIC-NATURA DA 48660

Request a series

FANTASTIC-NATURA DA 48660?
Back to product overview