FANTASTIC-NATURA dark wood DA 48840
FANTASTIC-NATURA dark wood is a solvent-based, low-fire scratch-resistant PUR natural wood effect varnish. The aromatic-free and lightfast topcoat is ideal for dark wood types. The natural character, wood feel and wood color tone remain almost unchanged. Application on light or bleached types of wood extends the range of possible uses.
Enquire articlePage content
- designed for dark and light wood types
- very fast drying (1h)
- can be used on bleached types of wood
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
Areas of application
FANTASTIC-NATURA dark wood can be used on almost all interior wood surfaces. It can also be used as a brightening primer, e.g. in combination with Hesse FANTASTIC-CLEAR with its four different gloss levels or FANTASTIC-CLEAR ULTRAMATT.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 82,3 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4071 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: DR 4071 |
Processing Instructions
| Due to hardening | 7 d / 20 °C |
|---|---|
| Surface sanding (grain size) | 120 - 180 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | m²/l |
| Processing information | Hardening of FANTASTIC-NATURA dark wood in a mixing ratio (by volume) of 10 : 1 with PU Hardener DR 4071 is recommended! However, FANTASTIC-NATURA dark wood can optionally be processed in a mixing ratio (by volume) of 10 : 1 with PU Hardener DR 4070. When hardening with DR 4070, we do not recommend coating wooden surfaces in damp rooms or kitchens. A slight deviation in the brightening effect in the hardening between DR 4071 and DR 4070 cannot be ruled out. A hardener type should therefore be agreed within a project.Please note that Hesse FANTASTIC-NATURA dark wood DA 48840 is only tested and approved for coatings in ship interiors in a mixing ratio (volume) of 10 : 1 with DR 4071. |
| Special notes | To delay wood discoloration due to UV radiation, the light protection agent SUN-EX ZD 9501 with a maximum addition of 2 % in relation to the base coat is effective. A combination structure with FANTASTIC-NATURA DA 48660 and FANTASTIC-NATURA dark wood DA 48840 is not possible!When used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code) 7, IMO Resolution MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ. 1120, this product can only be combined with other approved and technically suitable products. The maximum wet application rate when using this product as a low-flammable coating for seagoing vessels is 250 g/m²."A risk assessment has been carried out in accordance with Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating does not present a physical, health or environmental hazard." |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
FANTASTIC-NATURA dark wood DA 48840Your request for the series
FANTASTIC-NATURA dark wood DA 48840
