HYDRO-UV DIASTAIRS HUE 8640x(gloss level)

Our Hesse HYDRO-UV DIASTAIRS HUE 8640x(gloss level) provides great resistance against chemical and mechanical exposure. According to DIN 68861 the product exhibits the following resistance: abrasion 2C, chemical resistance 1B. DIASTAIRS is a multicoat lacquer that is even suitable for coating furniture and (given its creak-free formulation) also for the industrial coating of staircases.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Technical Specifications

Processing Instructions

Procedure example

Highlights

very good resistance properties
creak-free, suitable for staircases

Processing

Airless
Airmix
Automatic spray gun
other treatment

Areas of application

Best suited for coating heavily used components and also for staircases.

Technical information

PDF

HYDRO-UV DIASTAIRS HUE 8640x(gloss level) 1 MB

Sustainability data sheet

PDF

HYDRO-UV DIASTAIRS HUE 8640x(gloss level) 488 KB

Technical Specifications

Appearance	colourless
Number of layers (max)	3
Quantity per layers (min)	80 g/m²
Quantity per layers (max)	130 g/m²
Total quantity applied	390 g/m²

Processing Instructions

Surface sanding (grain size)	120 - 220
Intermediate sanding (grain size)	280 - 400
Yield per pass	8 m²/l
Processing information	Working viscosity can be adjusted with water or HYDRO Optimizer HZ 70 (maximum 3 % by volume). For strip cleaning, we recommend the HYDRO Cleaner HY 6995 at a mixing ratio of 1 : 10 with water. Remove dried-on lacquer residues with special thinner ZD 82.
Special notes	Always seal opened containers light-tight and air-tight to prevent skin forming. Remove dried lacquer residue using a sieve. Products in containers should be sieved before application.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.”

Procedure example

The coating process and the precise treatment parameters are adapted in each case to the respective application and drying conditions and can be found in the customer-specific process descriptions (surface techniques).

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.