INVIPRO-OIL OE 52860
This is a mixture of natural oils and natural waxes combined with alkyd resins refined with natural oil. Our fast drying oil is free from cobalt, butanone oxime and aromatic compounds. It contains a light stabiliser and protects against colour changes significantly longer than comparable oils. It penetrates very well into wood, maintaining the open porosity and breathability of the wood surface. The surface remains anti-static and appears untreated, but it is abrasion-proof and water repellent and is therefore not only better protected and more durable than a bare wood surface, it is also easier to clean, so real wood surfaces retain their individual and exclusive attributes longer. Due to its innovative formulation, the INVIPRO-OIL is decopaint-compliant and is not classified in accordance with the currently valid GHS/CLP regulation.
Enquire articlePage content
- Natural wood effect; the surface appears as if it were untreated
- Surface remains antistatic
- abrasion-resistant and water-repellent
Processing
Gauze pads / cloth
Areas of application
Throughout living areas as a natural wood effect oil on surfaces subject to normal to medium demands; mainly on light woods.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 17,226 % |
|---|---|
| Appearance | colourless |
| Decopaint base | Lb |
| Decopaint category | I |
| VOC EU % | 44,3 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 10 g/m² |
| Quantity per layers (max) | 30 g/m² |
| Total quantity applied | 60 g/m² |
Processing Instructions
| Drying | 16 h / 20 °C |
|---|---|
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 120 - 400 |
| Intermediate sanding (grain size) | |
| Yield per pass | 35 - 104 m²/l |
| Processing information | Apply and rub in the material using a saturated, fine sanding fleece. Remove any excess after a short exposure time using a cotton cloth. The surface should appear dry otherwise the product may not cure completely. In special cases the material can also be thinly applied by spraying. Rubbing in and subsequent removal of the excess are as for manual application. The corresponding safety instructions for spray application must be followed! The material can also be force dried (e.g. using IR drying up to a maximum of 40 °C). A suitable drying method and the required parameters must be determined on a customer-specific basis under practical conditions. |
| Special notes | The product is not suitable for woods susceptible to blue stain in damp rooms. Chemical and mechanical resistance depends on the number of coats of oil that are applied. Hardening at 25 : 1 with OR 5180 increases the surface’s mechanical and chemical resistance. The hardener additive accelerates complete drying. Pot life of the mixture is 1 h / 20 °C room temperature. The material dries with oxidation – please observe the general application instructions. Skin may form due to the high reactivity. Please remove before agitating. Subsequently the material should be filtered as a precaution. Stir carefully before use. Please observe the latest material safety data sheet! |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
INVIPRO-OIL OE 52860Your request for the series
INVIPRO-OIL OE 52860
