PERFECT-NATURA-BASE HDG 5410
Special clear HYDRO-PU acrylic primer for combination with PERFECT-NATURA HDE 54500 and PERFECT-NATURA bright HDE 54510. The product is preferably used on Oak and for open-pored applications. Methylpyrrolidone-free and free of phthalate plasticizers, therefore also suitable for coating children's toys.
Enquire articlePage content
- Basecoat natural wood effect, preferably on oak
- equalising
- elegant pores accentuation
- meets the See-BG / IMO test certificate
Processing
Airless
Airmix
Compressed air spraying
- water 57%
- mineral resources 1%
- fossil resources 42%
Areas of application
Single application as a primer, preferably on woods rich in substances, in combination with PERFECT-NATURA HDE 54500 and PERFECT-NATURA bright HDE 54510. In the complete field of interior fittings to preserve the natural wood color; mainly on coarse pored woods such as ash and Oak. Can also be used for stairs and handrails as well as on bleached surfaces (sufficiently dried).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 8,2 % |
| Number of layers (max) | 1 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 120 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: HDR 5091 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: HDR 5091 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 2 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 220 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 9 m²/l |
| Processing information | Add hardener slowly whilst stirring. Adjust the spray viscosity with water if required. Maximum additive volume 5 %. The hardener must always be added before thinning! Never store product mixed with hardener in closed containers. Over-paintability: possible with another coat of the same product or with suitable colourless materials. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
| Special notes | Avoid sanding through the material!Our PERFECT-NATURA-BASE HDG 5410 primarily prevents the HYDRO Lacquer from reacting with tannic acid in oak and thus unwanted wood discoloration. This basecoat does not exert a brightening effect, although depending on wood type it can be individually adapted in this respect using HYDRO Brightening agent BZ 440 (maximum addition 3 % in relation to the lacquer). The desired natural wood effect only fully emerges after finishing the dried basecoat with PERFECT-NATURA HDE 54500 or PERFECT-NATURA bright HDE 54510.Recoating is possible after sufficient drying and proper sanding, for instance using HDE 5400x(gloss level) or HDE 54799.In gloss levels x = 0, 1, 2, 3, 4, 5, this product is exclusively permitted to be combined with other approved and technically suitable products if it is to be used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 1120. The maximum application amount in wet film when this product is used as a low-flammable coating for seagoing vessels is 100 g/m².“A risk assessment has been conducted in accordance with Directive 2014/90/EU, Annex II, Section 3. The hardened and dried coating poses neither a physical or health hazard nor a hazard to the environment.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PERFECT-NATURA-BASE HDG 5410Your request for the series
PERFECT-NATURA-BASE HDG 5410
