PU Desert look DB 46031-(colour tone)

The colour tone selection and visual perception of the Hesse PU Desert look is intended to represent an individual sand texture.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

Desert look effect

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

Areas of application

For interior fittings, shop fittings and furniture construction, wherever the surface demands special optical and haptic requirements.

Technical information

PDF

PU Desert look DB 46031-(colour tone) 2 MB

Certificates

Technical Specifications

Appearance	opaque
Number of layers (max)	1
Quantity per layers (min)	120 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	150 g/m²
Mixing ratio (volumetric)	10 : 1 \| Hardener: DR 4070
Mixing ratio (gravimetric)	100 : 9 \| Hardener: DR 4070

Processing Instructions

Potlife	8 h / 20 °C
Drying	3 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)	320 - 400
Intermediate sanding (grain size)
Yield per pass	7 - 9 m²/l
Processing information	With direct coating on cleaned or sanded foils, please carry out trial painting if necessary to check the adhesion!
Special notes	Different working modes and machine settings within an object result in differences in the color and effect created. Please test the lacquer under real conditions, if necessary.

Procedure example

Wall cladding with a desert look effect

Substrate material: laminated MDF

Edge and profile sanding: 150 - 180 grit (dust removal)

Laminate sanding: 320 - 400 grit (dust removal)

Base coat: 150 x 180 g/m² Hesse EASY-FILL DP 4788-9343, mixing ratio 100 : 15 (by volume) with PU Hardener DR 4096-0002, addition of 10 % Thinner DV 4900 to the lacquer/hardener mixture

Drying: 5 h / 20 °C, better 16 h / 20 °CFiller sanding: 320 - 400 grit (dust removal)Application of 120 x 150 g/m², Hesse PU Desert look effect

DB 46031-8001,

mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070, addition of 10 - 15 % Thinner DV 4900 to the lacquer/hardener mixtureDrying: 5 min / 20 °CApplication of 60 - 100 g/m² Hesse PU Desert look effect

DB 46031-8001

, mixing ratio 10 : 1 (by volume) with PU Hardener DR 4070 with the cup gun and reduced spray pressure (0.5 - 1.0 bar). The spray pressure, nozzle size selection and working viscosity all affect the particle size and the effect.Drying: 30 min / 20 °CApplication of 60 - 100 g/m² Hesse PU Desert look effect

DB 46031-8008

DB 46031-1013

, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 with the cup gun and reduced spray pressure (0.5 - 1.0 bar). The spray pressure, nozzle size selection and working viscosity all affect the particle size and the effect.Drying: 16 h / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.