PU isolating primer DG 4720-0001
DG 4720-0001 is a transparent basecoat that is formulated for low viscosity and fast-drying. This coating material features a good isolation effect for use on resinous woods that are rich in active substances and is best suited for basecoats on very dark stained woods. DG 4720-001 is also suitable for stabilising softwood (improving scratch resistance). Moreover, sinkage is further reduced with DG 4720-0001 as an isolation sealer within a complete coating using high-solid, transparent basecoats and high gloss lacquers.
Enquire articlePage content
- isolating effect against wood contents and on resinous woods
- isolating effect beneath Hesse HYDRO lacquers
- very stable base coat in the complete coating with high gloss
- particularly transparent
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
- water 1%
- mineral resources 2%
- fossil resources 97%
Areas of application
DG 4720-0001 can also be used for shopfitting and all interior fixtures and fittings, including in kitchens and bathrooms as well as the fitting out of ship interiors.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 88,4 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 400 g/m² |
| Mixing ratio (volumetric) | 2 : 1 | Hardener: DR 4040 |
| Mixing ratio (gravimetric) | 100 : 58 | Hardener: DR 4040 |
Processing Instructions
| Potlife | 1 h / 20 °C |
|---|---|
| Drying | 2 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 180 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | 6 m²/l |
| Processing information | The process sequence and the number of coats required for insulation should be determined by applying a test coat to the original wood. Washing the wood with wood soap or Hesse Thinner DV 4900 beforehand can shorten the time taken. Please note that there may be changes to the colour and expressiveness of the wood as a result. A drying time of 16 h / 20 °C must be adhered to when working with content rich wood species! DG 4720-0001 can additionally be used on content rich, resinous woods or even on exotic wood species as an isolation sealer for transparent and coloured HYDRO lacquers. It should be noted that DG 4720-0001 must not be sanded back to the bare wood after drying and the required lacquer sanding. Please also observe the technical information for the respective HYDRO product. Conduct a trial coating on the original wood as necessary. |
| Special notes | This product is not suitable for application on bleached surfaces and for coating wengé wood. For use as MDF edge insulation under coloured lacquer systems, prepare the lacquer/hardener mixture with 20 - 30 % DV 4994 thinner. Always apply another coat on the same day, after prior sanding with grit 320 - 400 grit. When used as a flame retardant coating material for seagoing vessels according to SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120, this product may only be combined with other approved and technically suitable products. When used as a flame retardant coating material for seagoing vessels, the maximum total application amount in wet film is 200 g/m².“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU isolating primer DG 4720-0001Your request for the series
PU isolating primer DG 4720-0001
