PU Metallic Glass lacquer DB 4207x(gloss level)-(colour tone)

DB 4207x(gloss level)-(colour tone) is a coloured metallic glass lacquer for direct coating on cleaned glass surfaces. This light fast product with good coverage dries to create a uniformpattern and is available in virtually all metallic colour tones.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

direct coating with outstanding adhesion on glass
uniform pattern
[can be used for coating behind glass in shower cabinets]
available in many colour tones

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
Automatic spray gun
Spraying robot
High-performance automatic spraying unit

20%sustainable

water 1%
renewable resources 9%
mineral resources 10%
fossil resources 80%

Areas of application

DB 4207x(gloss level)-(colour tone) is ideally suited for all interior fixtures and fittings, shopfitting and furniture making.

Technical information

PDF

PU Metallic Glass lacquer DB 4207x(gloss level)-(colour tone) 2 MB

Certificates

Technical Specifications

Appearance	opaque
Number of layers (max)	1
Quantity per layers (min)	130 g/m²
Quantity per layers (max)	160 g/m²
Total quantity applied	160 g/m²
Mixing ratio (volumetric)	5 : 1 \| Hardener: DR 4076-0001
Mixing ratio (gravimetric)	100 : 22 \| Hardener: DR 4076-0001

Processing Instructions

Potlife	24 h / 20 °C
Drying	16 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)
Intermediate sanding (grain size)
Yield per pass	8 m²/l
Special notes	Metallic lacquers must always be applied evenly. Application quantities, application methods and drying conditions can influence the colour tone and effect. When painting on metal, if necessary, perform a test coating!

Procedure example

Glass partition, metallic tone M19181 as per customer request

Surface preparation: carefully clean and remove grease from the glass using Hesse Cleaning thinner ZD 101

Coating: 1 x 130 - 150 g/m² Hesse PU Glass colour lacquer DB 42074-M19181, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001, addition of 10 % Thinner DV 4900

Packable: after at least 16 h / 20 °C

Mountable or bondable: 5 d / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.