PU Multicoat Lacquer DE 4555x(gloss level)-0008 brightening

Two-component PU acrylate resin lacquer, levelling, lightening, fast drying, light fast and formulated with light protection. A multicoat lacquer for base and top coats for open-pore structures. This product can be used on bleached woods. Moreover, it is free from phthalate softeners, so that it is also suitable for coating children's toys.

Enquire article

Page content

Product features

Areas of application

Technical information

Sustainability data sheet

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

Lightening
fast-drying
with light protection

Processing

2C line
Airless
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

Areas of application

In the entire interior and for equalisation of grit defects, for example in cherry wood, or for preservation of natural wood tones such as, for example, oak, conifers and wenge wood.

Technical information

PDF

PU Multicoat Lacquer DE 4555x(gloss level)-0008 brightening 2 MB

Sustainability data sheet

PDF

PU Multicoat Lacquer DE 4555x(gloss level)-0008 brightening 907 KB

Certificates

Technical Specifications

Proportion of renewable raw materials %	1,8 %
Appearance	colourless
VOC EU %	83,3 %
Number of layers (max)	2
Quantity per layers (min)	100 g/m²
Quantity per layers (max)	150 g/m²
Total quantity applied	300 g/m²
Mixing ratio (volumetric)	10 : 1 \| Hardener: DR 4070
Mixing ratio (gravimetric)	100 : 11 \| Hardener: DR 4070

Processing Instructions

Potlife	3 d / 20 °C
Drying	45 min / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)	100 - 150
Intermediate sanding (grain size)	280 - 320
Yield per pass	8 - 9 m²/l
Special notes	The equalising effect is only obtained by direct coating of the wood. Do not sand through the lacquer product! For an additionally strong brightening effect, please use PU Natural wood effect DE 42900-0003. After sufficient drying (at least 48 h / 20 °C) and correct sanding, DE 45550-0008 can be recoated 1 x using the likes of UNA-PUR DE 4259x(gloss level) or MEGA-PUR DE 4503x(gloss level).

Procedure example

Pine/fir cupboard wall unit, dull matt

Basecoat: 1 x 100 - 120 g/m² Hesse PU Multicoat lacquer DE 45550-0008, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070

Intermediate drying: 30 - 60 min / 20 °C,

Lacquer sanding: 280 - 320 grit (dust removal)

Top coat: 1 x 100 - 120 g/m² Hesse PU Multicoat lacquer DE 45550-0008, mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070

Packable: after at least 16 h / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.