Surfaces that look like old-fashioned plaster
Surfaces that look like old-fashioned plaster
Description/features: This two-tone surface effect makes it possible to recreate the feel of old plastering techniques. Modern styles, such as a jeans effect, are also possible.
Areas of use: Unusual, creative accents for hard-wearing surfaces in interiors and shop fittings, for hotel furnishings, etc.
How to – plastering effect
Sample process:
Step 1:
- Sand down priming foil, laminated chipboard or MDF surfaces well
- Prime with one or two coats of 150 - 200 g/m² FANTASTIC-FILL DP 4755-9343 mixing ratio (by volume) 10 : 1 with PU Hardener DR 4071 thinned with 10 % PU Thinner DV 4900
- Dry for at least 16 hours at 20 °C
- Intermediate sanding/sanding grain 280 - 320
- Apply one or two coats of 150 - 200 g/m² or UNA-COLOR DB 45245-(colour tone) mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 if necessary, thin or retard the coloured lacquer depending on the size of the surface
- leave to harden for a few minutes, then use a Japanese spatula or other suitable trowel shapes to create a plastering effect
- Dry for at least 16 hours
Step 2:
- Apply one thin coat of maximum 50 - 60 g/m² of UNA-COLOR DB 45245-(colour tone) in an accent colour mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070 + 20 – 30 % PU Thinner DV 4900
- Dry for 3 - 5 hours
- Sand surface to create desired effect with grain 150 - 280
Step 3:
- Apply one finishing coat of 100 - 150 g/m² UNA-PUR DE 4259x(gloss level) mixing ratio (by volume) 10 : 1 with PU Hardener DR 4070
- Dry for at least 16 hours at 20 °C
Technical Information plastering effect
Products required
Processing and safety information: Please observe the latest technical information and the material safety data sheets for the stated individual products. Particular instructions:• PU lacquers should not be used or dried at material or room temperatures below 18 °C.• PU lacquered surfaces should be freshly sanded before finishing to avoid adhesion problems.• Please apply a test coating under real conditions! Note:This information is purely advisory and is based on the best knowledge available after careful research in line with current state of the art technology. It is not legally binding. We also refer you to our Terms and Conditions. The material safety data sheet as per regulation (EC) No. 1907/2006 is available.
Contact partner
