2C HYDRO-PU Brilliant lacquer HDE 54799
Two component HYDRO-PU acrylate lacquer with good body, water soluble, clear, high gloss and with outstanding chemical and mechanical resistance. It can be polished and buffed, PVC-resistant, cream and sweat resistant and light fast. Free from N-methylpyrrolidone and phthalate plasticisers, therefore also suitable for coating children's toys.
Enquire articlePage content
- Good body
- Good transparency
- Light-fast
- outstanding chemical and mechanical resistance
- good polishing and buffing properties
Processing
Airless
-
Airless low pressure
Airmix
Compressed air spraying
- water 57%
- renewable resources 6%
- mineral resources 2%
- fossil resources 35%
Areas of application
For high quality residential furniture with high-demand surfaces and all interior fittings, including those in kitchens and bathrooms. Can also be used on bleached surfaces (that are adequately dry).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 5,931 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 4,1 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 5 : 1 | Hardener: HDR 5091 |
| Mixing ratio (gravimetric) | 100 : 21 | Hardener: HDR 5091 |
Processing Instructions
| Potlife | 2 h / 20 °C |
|---|---|
| Drying | 16 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 3 d / 20 °C |
| Surface sanding (grain size) | 320 - 600 |
| Intermediate sanding (grain size) | 400 - 800 |
| Yield per pass | 7 - 10 m²/l |
| Processing information | Work the hardener in well then use water (around 20 %) to adjust the spray viscosity to be 20 - 25" (DIN 4 mm) to prevent reaction foam.The hardener must always be added before dilution! Never store any material mixed with hardenerin closed packaging.Only ever apply 1 layer at a maximum of 120 g/m² in one application process. Do not, as may be familiar from other high gloss systems, apply several thin layers with brief intermediate drying.A second application can if necessary follow without intermediate sanding after the first layer of HDE 54799 has dried for 5 – 6 h / 20°C. Lacquer sanding of HDE 54799 is only ever possible after drying for > 16 h / 20°C.We recommend graduated lacquer sanding with 400 and 600 grit. Graduated sanding up to 800 grit is advisable in the case of dark woods or colour tones.Our HYDRO-PU Brillant lacquer HDE 54799 is suitable for finishing on PERFECT-COLOR HDB 54345-(colour tone) and on woods pre-primed with PERFECT-BASE HDE 5407. |
| Special notes | Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
2C HYDRO-PU Brilliant lacquer HDE 54799Your request for the series
2C HYDRO-PU Brilliant lacquer HDE 54799
