HYDRO Colour stain BC (colour tone) for spraying
Hesse Colorbeize BC is a pure pigment stain for achieving transparent to opaque stain images. The specially selected pigments enable high brilliance and transparency. The structure of the wood is covered to a greater or lesser extent depending on the color depth. This also allows color tones to be achieved that are lighter than the wood's own color. The light fastness
of color stains represents the maximum achievable among all stains. Opaque color tones can be adjusted according to RAL, Sikkens or NCS color charts, for example. The color tone to be achieved depends on the type of wood.
Enquire articlePage content
- Can be used on many woods
- Based on fine particle pigments
- Use for tones uncommon in wood, for instance according to RAL
Processing
Airmix
Compressed air spraying
Spreading
other spraying methods
Airless low pressure
Areas of application
In industry and crafts for furniture, stairs, doors for stains with subsequent overpainting.
Technical information
Sustainability data sheet
Technical Specifications
| Appearance | glazing |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 30 g/m² |
| Quantity per layers (max) | 60 g/m² |
| Total quantity applied | 60 g/m² |
Processing Instructions
| Drying | 3 h / 20 °C |
|---|---|
| Surface sanding (grain size) | 120 - 180 |
| Intermediate sanding (grain size) | |
| Yield per pass | 16 - 44 m²/l |
| Processing information | The HYDRO stain is sprayed on with a cup gun (1.2-1.5 mm nozzle, approx. 2 bar spray pressure, throttled stain supply if necessary) in a uniformly moist, not wet(!) cross coat. Any surplus is not wiped off! Multiple, thin, quasi patina-like fogging by spraying results in a particularly uniform stain pattern. |
| Special notes | Hesse stains are matched to the respective wood species in terms of color tone and processing. Other types of application are available. All stains in the same series can be mixed with each other. Brightening by adding water. Can be tinted with color concentrates from the series: BP 30xx and BP 3570 NEW. In the case of wood types with a high proportion of water-soluble wood constituents (e.g. Oak), discoloration may occur when priming with HYDRO lacquers. We therefore recommend a PU primer, especially for pastel or white color tones. For fine-pored woods, which sometimes have a somewhat uneven, swirly wood structure, such as beech, maple and cherry tree, spray application without wiping is preferred. Due to the uniform spray application, each wood area receives the same amount of stain, which results in better equalization. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
HYDRO Colour stain BC (colour tone) for sprayingYour request for the series
HYDRO Colour stain BC (colour tone) for spraying
