PERFECT-NATURA HDE 54500
The light fastness PERFECT-NATURA HDE 54500 can be used to create open-pored, dull matt, scratch resistant and mechanically durable natural wood effects. The 11% renewable raw material content makes this coating material particularly interesting for sustainable objects. Due to its balanced brightening properties, it can be used on both light and dark furniture woods. The natural character, the feel of the wood and the wood color remain almost unchanged. This makes it the ideal alternative to solvent-based natural wood effect varnishes.
Enquire articlePage content
- natural wood effect for light and dark wood types
- dull matt look
- integrated light protection
- resource-saving, 11% renewable raw materials
- fire protection standard EN 13501 (B-s1,d0)
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
- water 65%
- renewable resources 11%
- mineral resources 1%
- fossil resources 23%
Areas of application
For all interior fittings in living areas, with a natural wood effect; predominantly on light woods. Also for stairs and handrails. Can also be used on bleached surfaces (that are adequately dry).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 11,37 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 5,2 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 240 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: HDR 5091 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: HDR 5091 |
Processing Instructions
| Potlife | 3 h / 20 °C |
|---|---|
| Drying | 3 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 220 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 10 m²/l |
| Processing information | PERFECT-NATURA can be applied as a multicoat lacquer, i.e. as a basecoat and topcoat.Depending on wood type, it is advisable to use PERFECT-NATURA-BASE HDG 5410 to minimise wood discoloration.Add the hardener in a slow stream while stirring. Then add water as necessary to adjust the spray viscosity. Maximum added quantity 5 %. The hardener must always be added before dilution! Never store any material mixed with hardener in closed packaging. Over-paintability: possible with another coat of the same product or with suitable colourless materials. Use water to clean work tools. Use Hesse HYDRO Cleaning agent HV 6917 to remove any dried lacquer residues. Rinse out combined application devices (HYDRO and solvent lacquers) using Hesse HYDRO Reversing agent HV 6904. |
| Special notes | Stir the material well!We recommend using PERFECT-NATURA-BASE HDG 5410 in association with PERFECT-NATURA HDG 54500 (adding at most 5 % water) on tannin-rich woods with coarse pores, such as oak, to minimise wood discoloration and ensure effective pore wetting. Complete pore wetting substantially reduces the risk of impurities in the wood pores and facilitates surface care. The lightening effect is significantly dependent on the type of wood and its quality. Please therefore conduct a trial coating on the original bare wood in advance to check the result.Caution! Avoid sanding through the basecoat. There is a risk of blotching.This product is only permitted to be combined with other approved and technically suitable products if it is to be used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, latest version, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when this product is used as a low-flammable coating for seagoing vessels is 160 g/m².“A risk assessment has been conducted in accordance with Directive 2014/90/EU, Annex II, Section 3. The hardened and dried coating poses neither a physical or health hazard nor a hazard to the environment.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PERFECT-NATURA HDE 54500Your request for the series
PERFECT-NATURA HDE 54500
