PU Metallic-topcoat DU 45457-99xx(effect)
Our PU Metallic and Pearl Effect lacquers in the DU 45457-990xx range are light fast, two component PU acrylic resin top coat lacquers for light and dark colour tones that are pretreated with the DB 45245-(colour tone), DB 45205-(colour tone) and DB 48885-(colour tone) colour lacquer ranges. These products can be used to create striking effects with a high brilliance. PU Metallic Top coat DU 45457-99015 is especially suitable for achieving an outstanding depth effect on a black substrate. Light colour tones take on a lustrous sheen with the specially configured “Pearl Effect” DU 45457-99060.
Enquire articlePage content
- Striking effect
- high brilliancy
- outstanding depth effect
- individual surface finish
Processing
Compressed air spraying
Areas of application
Hesse PU Metallic Effect lacquers and Pearl Effect lacquers are for instance used to coat hotel fixtures and fittings, individual shop fittings and sophisticated interior fittings.
Technical information
Certificates
Technical Specifications
| Appearance | glazing |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 100 g/m² |
| Total quantity applied | 100 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 8 h / 20 °C |
|---|---|
| Drying | 3 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 320 - 600 |
| Intermediate sanding (grain size) | |
| Yield per pass | 9 m²/l |
| Processing information | Single-coat application at 80 - 100 g/m² is possible on prepared colour lacquer surfaces. In a mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001, after prior mixing in of 5 % Glass lacquer additive EL 460-0025 as a lacquer component, it can also be used for direct coating on glass. The glass surface must be carefully cleaned and this should be performed using Cleaning thinner ZD 101. If a coloured finish is subsequently to be applied, please also harden UNA-COLOR DB 45245-(colour tone) or UNA-THIX-COLOR DB 45205-(colour tone) with PU Hardener DR 4076-0001 at a mixing ratio (by volume) 5 : 1. |
| Special notes | Metallic lacquers must be uniformly applied. The application quantity, application methods and drying conditions all significantly influence colour tone and effect. Pre-priming is possible depending on the desired finish and substrate, for example by using DB 48885-(colour tone), DB 45245-(colour tone) or DB 45205-(colour tone). The reflection and multicoloured effects can only be achieved on a black substrate. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Metallic-topcoat DU 45457-99xx(effect)Your request for the series
PU Metallic-topcoat DU 45457-99xx(effect)
