PU Metallic DB 4263x(gloss level)-(colour tone)
Two-component PU acrylate colour lacquer, pigmented, light-fast, opaque, fast-drying and with a uniform colour effect. For effect coatings from open- to closed-pore surface processes. Available in many colours.
Enquire articlePage content
- uniform colour effect
- light fast
- fast drying and aromatic-free
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Spraying robot
other spraying methods
Areas of application
For decorative interiors, hotel facilities and furniture surfaces on appropriate PU primers. Certified according to IMO so it can be applied on ship interiors
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Appearance | opaque |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 120 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4070 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: DR 4070 |
Processing Instructions
| Potlife | 24 h / 20 °C |
|---|---|
| Drying | 3 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 150 - 320 |
| Intermediate sanding (grain size) | 320 - 400 |
| Yield per pass | m²/l |
| Processing information | The effect is influenced by the spray nozzle size, the air pressure and the addition of thinner! Hardening 5 : 1 with PU Hardener DR 4076-0001 after mixing in 5 % Hesse Glass lacquer additive EL 460-0025 to the lacquer component also enables direct lacquering on glass after proper cleaning.Please note that Hesse PU Metallic DB 4263x (gloss level)-(colour tone) is only tested and approved for coatings in ship interiors in the mixing ratio (by volume) 10 : 1 with DR 4070. |
| Special notes | Metallic paints must be applied uniformly. The application quantities, application methods and drying conditions influence the color tone and effect. Depending on the desired surface and substrate, pre-priming is possible, e.g. with Hesse PU insulating filler DP 4791-9343, FANTASTIC-FILL DP 4755-9343 or UNA-COLOR DB 45245-(color tone) or UNA-THIX-COLOR DB 45205-(color tone). For optimized chemical and mechanical resistance, as well as for individual gloss level design, the metallic lacquer can be overcoated after 4 - 6 h / 20 °C without Intermediate sanding of the lacquer, e.g. with UNA-PU DE 4259x(gloss level), FANTASTIC-CLEAR DE 4877x(gloss level), FANTASTIC-CLEAR ULTRAMAT DE 48770-0, MEGA-PU DE 4503x(gloss level), PU NANO-TOP DU 45540 or FANTASTIC-BRILLANT DU 48799.For copper, respectively golden color tones of the color tone series DB 4263x(gloss level)-(color tone), as well as individual discolorations with these color tone series, a transparent Top coat is mandatory to avoid corrosion spots within < 2 h / 20 °C!For normal dry cleaning, we recommend using a soft dust cloth. Microfiber or leather cloths are suitable for wet cleaning. Dampen the cloth with water, wring it out and clean with a damp cloth. Sharp household cleaners or abrasive substances are unsuitable!When used as a low-flammable coating for seagoing vessels in accordance with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code) 7, IMO Resolution MSC.97(73)-(2000 HSC Code) 7, IMO MSC/Circ. 1120, this product can only be combined with other approved and technically suitable products. The maximum wet application rate when using this product as a low-flammable coating for seagoing vessels is 120 g/m². "A risk assessment has been carried out in accordance with Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating does not present a physical, health or environmental hazard." |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PU Metallic DB 4263x(gloss level)-(colour tone)Your request for the series
PU Metallic DB 4263x(gloss level)-(colour tone)
