FANTASTIC-CLEAR ULTRAMATT DE 48770-0
FANTASTIC-CLEAR ULTRAMATT is a light fast, transparent,scratch resistant and extremely matt acrylate-based multicoat lacquer. Its versatile application options on all common woods and its ease of use mean that FANTASTIC-CLEAR ULTRAMATT is outstanding as a multicoat orfinishing lacquer on top of Hesse PU basecoats. It is an ideally matched combination product as an ultra-matt finishing lacquer on FANTASTIC-COLOR and gives a remarkable velvety feel to the surface. Application of FANTASTIC-CLEAR ULTRAMATT even on bleached woods is also possible.
Enquire articlePage content
- ultra matt < 3 % gloss
- velvety-soft feel
- universally usable, even for heavily frequented areas
- can be used for high chemical and mechanical resistance on bleached woods
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
High-performance automatic spraying unit
Automatic spray gun
Areas of application
FANTASTIC-CLEAR ULTRAMATT is a high quality PU lacquer for all interior and shop fittings; it can also be used for coatings in kitchens and bathrooms.
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0,252 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 73,1 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 120 g/m² |
| Quantity per layers (max) | 200 g/m² |
| Total quantity applied | 400 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: DR 4071 |
| Mixing ratio (gravimetric) | 100 : 11 | Hardener: DR 4071 |
Processing Instructions
| Drying | 2,5 h / 20 °C |
|---|---|
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 150 - 400 |
| Intermediate sanding (grain size) | 280 - 400 |
| Yield per pass | 5 - 8 m²/l |
| Processing information | Finishers wanting to work exclusively with PU Hardener DR 4070 have the option of mixing FANTASTIC-CLEAR ULTRAMATT in a mixing ratio (by volume) of 5 : 1 with PU Hardener DR 4070. This mixing ratio may slightly extend the drying time. Conduct a trial coating under practical conditions as necessary.This product is only suitable as a flame retardant coating for seagoing vessels when the default hardening is used, not the optional hardenings! The maximum wet application amount when using this product as a low-flammable coating for seagoing vessels is 240 g/m². |
| Special notes | FANTASTIC-CLEAR ULTRAMATT DE 48770-0 may not be mixed with the FANTASTIC-CLEAR DE 4877x(gloss level) range! Mixing these two lacquer systems could result in incompatibility reactions or alterations in the respective product properties.Colour lacquers UNA-COLOR DB 4524x(gloss level)-(colour tone) and FANTASTIC-COLOR DB 4888x(gloss level)-(colour tone) can be tinted using FANTASTIC-CLEAR ULTAMATT as a glazing lacquer (maximum addition 1.5 %). The following Hesse basecoats can be combined with FANTASTIC-CLEAR ULTRAMATT depending on surface requirements and substrate material: DG 4734, DG 4717-0005, DG 4768-0011 and DG 4750.“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
FANTASTIC-CLEAR ULTRAMATT DE 48770-0Your request for the series
FANTASTIC-CLEAR ULTRAMATT DE 48770-0
