What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/UK
HYDRO Colour stain BC (colour tone) for spraying

HYDRO Colour stain BC (colour tone) for spraying

Hesse Colour stain BC is a pure pigment stain for achieving transparent to opaque staining. The specially selected pigments enable high brilliance and transparency. The wood’s structure is more or less strongly covered depending on colour tone depth. Colour tones can therefore be achieved which are even lighter that the inherent wood colour. The light fastness

of Colour stains represents the maximum achievable among all stains. Covering colour tones can be achieved, per RAL, Sikkens or NCS colour charts for example. The colour tone to be achieved depends on the type of wood.

Enquire article
Highlights
  • Can be used on many woods
  • Based on fine particle pigments
  • Use for tones uncommon in wood, for instance according to RAL

Processing

  • Airmix Airmix
  • Compressed air spraying Compressed air spraying
  • Spreading Spreading
  • other spraying methods other spraying methods
  • Airless low pressure Airless low pressure
99%sustain­able
  • water 99%
  • fossil resources 1%

Areas of application

For staining with subsequent over-painting in industry and handcrafting of furniture, stairs and doors.

Technical information

Technical Specifications

Appearance glazing
Number of layers (max) 1
Quantity per layers (min) 30 g/m²
Quantity per layers (max) 60 g/m²
Total quantity applied 60 g/m²

Processing Instructions

Drying 3 h / 20 °C
Surface sanding (grain size) 120 - 180
Intermediate sanding (grain size)
Yield per pass 16 - 44 m²/l
Processing information Our HYDRO stain should be sprayed in a cross coat using a cup gun (1.2-1.5 mm nozzle, circa 2 bar spray pressure, potentially reduced stain supply) to be uniformly moist – not wet. Do not wipe any excess! Multiple thin, almost sheen-like spray fog coats result in a particularly uniform stain appearance.
Special notes Hesse stains are matched to each type of wood in terms of colour tone and processing. Further application methods are possible. All stains from the same range can be mixed with one another. Lighten by adding water. Can be tinted with colour concentrates in the range: BP 30xx and BP 3570 NEW.Discolorations may arise due to priming with HYDRO Lacquers on woods with a high proportion of soluble wood contents (such as oak). We therefore recommend a PU Basecoat, particularly in the case of pastel or white colour tones. Spraying without wiping is preferable on fine-pored woods that sometimes have a somewhat uneven, swirling wood structure, including beech, maple and cherry tree. A uniform spray application ensures that each area of the wood receives the same amount of stain, which results in better equalization.
General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
HYDRO Colour stain BC (colour tone) for spraying

Request a series

HYDRO Colour stain BC (colour tone) for spraying?
Back to product overview