What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/UK
HYDRO Metalliclacquer HB 65445-(colour tone)

HYDRO Metalliclacquer HB 65445-(colour tone)

Strong thixotropic 1C HYDRO Metallic colour lacquer with good ability to stay on vertical surfaces and uniform effect formation. This light fast coloured lacquer is available in many colors and is particularly suitable for coating three-dimensional parts.

Enquire article
Highlights
  • even, non-cloudy effect formation
  • the special flow characteristics prevent drips or sagging on vertical surfaces
  • creates an exclusive metallic look

Processing

  • Airmix Airmix
  • Compressed air spraying Compressed air spraying

Areas of application

The material can be used universally as a metallic effect lacquer for closed-pore structures in living areas. Its thixotropic flow behaviour facilitates the coating of vertical surfaces. It can also be used for the direct coating of suitable, cleaned and sanded foils.

Technical information

Technical Specifications

Appearance opaque
Number of layers (max) 2
Quantity per layers (min) 100 g/m²
Quantity per layers (max) 120 g/m²
Total quantity applied 300 g/m²

Processing Instructions

Drying 8 h / 20 °C
Due to hardening 1 d / 20 °C
Stackable according to 16 h / 20 °C
Surface sanding (grain size) 120 - 400
Intermediate sanding (grain size)
Yield per pass 9 m²/l
Processing information When directly coating cleaned or sanded foils, please apply a test coat to check the bonding!.Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. This product can be subjected to forced drying. Pre-priming is possible depending on the required finish and carrier material, for instance using: COOL-FILL HP 6645-9343, PERFECT-FILL HDP 5650-9343, FANTASTIC-FILL DP 4755-9343.
Special notes The material is supplied ready to use and only needs to be diluted in exceptional cases. If needed, add a maximum of 5 % water or a maximum of 3 % HZ Optimizer 70. This addition significantly reduces the thixotropy.

Procedure example

Sideboard, MDF carcass, light brass

MDF sanding with dust removal.

Base coat: 2 x 150 - 200 g/m² COOL-FILL HP 6645-9343.

Intermediate drying and sanding.

Final sanding using 400 grit before finish coating.

1 x finish with 100 - 120 g/m² Hesse HYDRO Metallic lacquer HB 65445-M19770.

The metallic effect is self-forming.

Drying overnight at 20 °C room temperature and adequate air circulation.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
HYDRO Metalliclacquer HB 65445-(colour tone)

Request a series

HYDRO Metalliclacquer HB 65445-(colour tone)?
Back to product overview