What are you looking for?
Products, article numbers, services, inspiration, brochures, ... We will find what you are looking for.
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
Your target group has been successfully activated.

Would you like to learn more about the benefits you will enjoy?

Learn more
EN/UK
HYDRO Peel-off lacquer HA 6620 clear

HYDRO Peel-off lacquer HA 6620 clear

Strip lacquer based on water soluble polymers, removable without residues after drying. Protective lacquer for the widest variety of substrates, plus for equipping dry spray booths and spray areas.

Enquire article
Highlights
  • water soluble and water reducible
  • Fast-drying
  • easily removed from the substrate after drying

Processing

  • Compressed air spraying Compressed air spraying
  • Spreading Spreading
89%sustain­able
  • water 71%
  • renewable resources 17%
  • mineral resources 1%
  • fossil resources 11%

Areas of application

As a protective coating for a wide variety of substrates in the furniture industry. since it is easy to remove from the substrate it is used as an easily removable film in dry spray booths and spray areas, making cleaning easier. It can also be used as a temporary protective film for coated surfaces.

Technical information

Technical Specifications

Proportion of renewable raw materials % 17,2 %
Appearance colourless
VOC EU % 17,1 %

Processing Instructions

Stackable according to 16 h / 20 °C
Surface sanding (grain size)
Intermediate sanding (grain size)
Yield per pass m²/l
Processing information As a general rule: the thicker the application of stripping lacquer, the easier it will subsequently be to remove it from the substrate without residues. Please conduct a trial coating on original substrate material to determine the ideal application quantity for your intended purpose.
Special notes Not suitable for water-curtain spray booths! Please dilute the material beforehand with up to 10 % water when processing via the spraying process! Stir in the water well by hand until the liquid is homogeneous. Then stir the mixture well by hand!Special rollers are required for roller application! When using as a protective lacquer for coated surfaces, please conduct a prior test of the material’s suitability under practical conditions! Use water to clean work tools.

Procedure example

Protective lacquer for dry spray booth walls

Clean and remove grease from the substrate material; but do not sand.

Apply 1 x circa 150 g/m

2

HA 6620 using a roller or brush (thin the material appropriately with up to 10 % water if spraying!).

Drying, subject to temperature and humidity, at least 4 h

Without sanding then apply another

1 coat at circa 150 g/m² HA 6620 using a brush or roller (thin the material appropriately with up to 10 % water if spraying!).

Dry for at least 16 h at 20 °C and with adequate air circulation

A further 1 - 2 coats can be applied as necessary depending on the substrate material.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.

Request article and material safety data sheet
HYDRO Peel-off lacquer HA 6620 clear

Request a series

HYDRO Peel-off lacquer HA 6620 clear?
Back to product overview