PERFECT-BASE HDG 5407
PERFECT-BASE HDG 5407 is a two-component acrylic basecoat. This clear product is water-dilutable and features good resistance against both chemical and mechanical demands. Our base coat for open- to closed pore structures is also characterised by its outstanding accentuation of the wood and its superb stability beneath high gloss.
Enquire articlePage content
- Outstanding accentuation
- Good chemical and mechanical resistance
- flame retardant according to IMO
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
Areas of application
For all interior fixtures and fittings, including high demand areas such as kitchens and bathrooms.
Ideal for heavily stressed surfaces and woods rich in extractive (such as ash, oak, pine, etc.). Also for stairs and handrails. Can also be used on bleached surfaces (that are adequately dry).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 9,5 % |
| Number of layers (max) | 3 |
| Quantity per layers (min) | 100 g/m² |
| Quantity per layers (max) | 150 g/m² |
| Total quantity applied | 450 g/m² |
| Mixing ratio (volumetric) | 5 : 1 |
| Mixing ratio (gravimetric) | 100 : 21 |
Processing Instructions
| Drying | 4 h / 20 °C |
|---|---|
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | |
| Intermediate sanding (grain size) | |
| Yield per pass | m²/l |
| Processing information | Add hardener slowly whilst stirring. Adjust the spray viscosity with water if required. Maximum additive volume 5 %. The hardener must always be added before thinning! Never store product mixed with hardener in closed containers. Recoatability: with itself following proper sanding. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
| Special notes | Do not sand through this product! Another lacquer coat can be applied on top after sufficient drying time and proper sanding, for instance using PERFECT-TOP HDE 5400x(gloss level) or HDE 54799.This product must only be combined with other approved and technically suitable products when used as a flame retardant coating material for seagoing vessels according to the latest version of SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120. The maximum application amount in wet film when using this product as a flame retardant coating material for seagoing vessels is 130 g/m².“A risk assessment was undertaken according to Directive 2014/90/EU, Annex II, Section 3. This coating does not pose a physical risk to health nor a risk to the environment when cured and dried.” |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PERFECT-BASE HDG 5407Your request for the series
PERFECT-BASE HDG 5407
