PERFECT-NATURA bright HDE 54510
The light fast PERFECT-NATURA bright HDE 54510 can be used to achieve an open-pored, dull matt, scratch resistant and mechanically resilient surface with the natural look of wood. This topcoat is particularly interesting for sustainable objects, as it contains 11% renewable raw materials. Due to its pronounced brightening properties, PERFECT-NATURA bright is particularly suitable for use on light-colored wood types.
Enquire articlePage content
- With light protection
- Natural wood effect
- Dull matt with good scratch resistance
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
Areas of application
In the complete field of interior fittings for living areas as a natural wood effect; mainly on light-colored woods. Can also be used for stairs, Handrails and bleached Surfaces.
Technical information
Sustainability data sheet
Technical Specifications
| Proportion of renewable raw materials % | 11,37 % |
|---|---|
| Appearance | colourless |
| VOC EU % | 5,2 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 120 g/m² |
| Total quantity applied | 240 g/m² |
| Mixing ratio (volumetric) | 10 : 1 |
| Mixing ratio (gravimetric) | 100 : 11 |
Processing Instructions
| Potlife | 3 h / 20 °C |
|---|---|
| Drying | 3 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Stackable according to | 16 h / 20 °C |
| Surface sanding (grain size) | 120 - 220 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 10 m²/l |
| Processing information | PERFECT-NATURA bright can be applied as a top coat, i.e. as a primer and as a top coat. Depending on the type of wood, the use of PERFECT-NATURA-BASE HDG 5410 is recommended to minimize wood discoloration. Add the hardener in a slow stream while stirring. If necessary, adjust the spray viscosity by adding water. Maximum addition rate 5 %. Hardener must always be added before thinning! Do not store material mixed with hardener in closed packaging. Overcoatability: possible with itself or suitable clear materials. Clean work tools with water. Use Hesse HYDRO Cleaner HV 6917 to remove dried lacquer residues. For combined work (water-based and solvent-based lacquers), rinse application equipment with Hesse HYDRO Rewetting agent HV 6904. |
| Special notes | Stir the paint material well! The product can be used on surfaces bleached with hydrogen peroxide and then sufficiently dried.To minimize wood discoloration and ensure effective pore wetting, we recommend the use of PERFECT-NATURA-BASE HDG 5410 in compound with PERFECT-NATURA bright HDG 54510 (addition of max. 5% water) on wood species rich in tannins and with coarse pores, such as Oak. Complete pore wetting considerably reduces the risk of impurities in the wood pores and makes surface maintenance easier. The brightening effect is highly dependent on the type and quality of the wood. Therefore, please carry out a test coating on the original raw wood in advance and convince yourself of the result.Caution! Do not sand through the primer. Risk of staining. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PERFECT-NATURA bright HDE 54510Your request for the series
PERFECT-NATURA bright HDE 54510
