Priming stain BG (colour tone) for spraying and wiping off
Hesse BG priming stains combine pigment and dyestuff properties in a sensible way: the brilliance and luminosity of the dyestuffs are complemented by the levelling properties and increased light fastness of the pigments. At the same time, the emphasis of the pores can be influenced. The result is a brilliant to slightly covered stain image without a marked emphasis of the pores. The color tone to be achieved depends on the type of wood.
Enquire articlePage content
- Stain appearances range from brilliant to muted
- Can be used on many woods
- HYDRO lacquers can be applied as the next coat
Processing
Compressed air spraying
Airless low pressure
Airmix
Wiping with a cloth
Spreading
other spraying methods
-
Airless
Automatic spray gun
-
Gauze pads / cloth
-
other treatment
Dipping
Spraying robot
Areas of application
In industry and crafts for furniture, stairs, doors for stains with subsequent overpainting.
Technical information
Sustainability data sheet
Technical Specifications
| Appearance | glazing |
|---|---|
| Number of layers (max) | 1 |
| Quantity per layers (min) | 30 g/m² |
| Quantity per layers (max) | 60 g/m² |
| Total quantity applied | 60 g/m² |
Processing Instructions
| Drying | 2 h / 20 °C |
|---|---|
| Surface sanding (grain size) | 120 - 180 |
| Intermediate sanding (grain size) | |
| Yield per pass | 18 - 37 m²/l |
| Processing information | Spray the stain to form excess. Stir stains well before and during processing. Alternatively it can also be worked with a brush or sponge. Wipe evenly with a wiping brush after applying the stain. We recommend small spray nozzle sizes for stains that are to be sprayed but not subsequently wiped. Although large spray nozzle sizes are advisable when spraying stains that are subsequently to be wiped. |
| Special notes | Hesse stains are matched to the respective wood species in terms of color tone and processing. Other types of application are available. All stains in the same series can be mixed with each other. Brightening by adding water. Can be tinted with color concentrates from the series: BP 30xx and BP 3570 NEW. In the case of wood types with a high proportion of water-soluble wood constituents (e.g. Oak), discoloration may occur when priming with HYDRO lacquers. We therefore recommend a PU primer, especially for pastel or white color tones. Spray application with wiping is preferred for coarse pored woods such as Oak, Ash, Mahogany. The pores are better wetted due to the rich surplus and subsequent incorporation by wiping with a brush. |
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
Priming stain BG (colour tone) for spraying and wiping offYour request for the series
Priming stain BG (colour tone) for spraying and wiping off
