Proterra RESIT GE 1710x(gloss level)

Surface finish based on shellac, oil and Carnauba wax in a grit alcohol solution, light, natural colour, extremely mild odour; with equalising effect.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

Based on renewable raw materials,
Low odour,

Processing

Airless
Airmix
Compressed air spraying
Smooth roller
Airless low pressure
High-performance automatic spraying unit
Automatic spray gun
Spraying robot

Areas of application

For interior woodwork such as living room, bedrooms and children's furniture.Also ideal for varnishing inside cupboards and for children's toys.

Technical information

PDF

Proterra RESIT GE 1710x(gloss level) 2 MB

Certificates

PDF

Test report VOC and formaldehyde emission (RAL UZ 38) Arrȇté étiguetage 173 KB

Technical Specifications

Appearance	colourless
Number of layers (max)	2
Quantity per layers (min)	30 g/m²
Quantity per layers (max)	60 g/m²
Total quantity applied	120 g/m²

Processing Instructions

Drying	1 h / 20 °C
Due to hardening	16,1 h / 20 °C
Stackable according to	2 h / 20 °C
Surface sanding (grain size)	180 - 320
Intermediate sanding (grain size)	320 - 400
Yield per pass	14 - 28 m²/l
Processing information	Before use, stir well and agitate! The mechanical and chemical resistance of the surface will be increased by hardening at 10 : 1 (by volume or by weight) using Hardener OR 5170. The mixture must be used within 2 h / 20 °C room temperature.The hardener contains isocyanate. Please observe safety instructions; see the safety data sheet.
Special notes	On dark woods such as walnut and alder, the equalising effect can be undesirable. The material contains no oils that dry by oxidation and therefore develops no heat while drying. There is therefore no danger of self-ignition of cloths/pads wetted with the product. When using products such as Proterra CEROL, e.g. GE 12006-2001, as end finish. Please observe the instructions for handling of oxidative (self-igniting) materials. See technical information for the products in question.

Procedure example

Children's room fittings, natural maple Wood sanding: 180 - 220 grit followed by dust removal. Priming 1 x 40 - 60 g/m² with Proterra RESIT GE 17102. Drying: 30 - 60 min / 20° C room temperature and with good ventilation. Polishing rub-down: grit 400 with subsequent dust removal. Final finish with hand application of Proterra CERAFLUID GZ 1020-0001 with cotton cloth. Finally, polish in lightly and evenly with soft, cotton cloth.

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.