PU Mirror lacquer DB 46334-M0966

Hesse PU Mirror effect lacquer DB 46334-M0966 is a light-fast, two-component PU Effect lacquer for glass coating. This fast-drying lacquer with its very good adhesion properties is particularly suitable for exceptional and creative surfaces on white glass. With little effort and by using the Hesse Effect agent DZ 4992-05856 combined with the mirror lacquer an antique effect can be achieved impressively.

Enquire article

Page content

Product features

Areas of application

Technical information

Certificates

Technical Specifications

Processing Instructions

Procedure example

Highlights

Light-fast
outstanding adhesion
Fast-drying
individual antique effect possible

Processing

Compressed air spraying

Areas of application

DB 46334-M0966 can be used for the complete interior decoration for the living area on white glass, but as well on structured glass with a suitable protective top coating e.g. DB 42105-(colour tone).

Technical information

PDF

PU Mirror lacquer DB 46334-M0966 2 MB

Certificates

Technical Specifications

Proportion of renewable raw materials %	0 %
Appearance	opaque
VOC EU %	98,7 %
Number of layers (max)	1
Quantity per layers (min)	60 g/m²
Quantity per layers (max)	80 g/m²
Total quantity applied	80 g/m²
Mixing ratio (volumetric)	25 : 1 \| Hardener: DR 4076-0002
Mixing ratio (gravimetric)	100 : 4 \| Hardener: DR 4076-0002

Processing Instructions

Potlife	8 h / 20 °C
Drying	1 h / 20 °C
Due to hardening	7 d / 20 °C
Stackable according to	16 h / 20 °C
Surface sanding (grain size)
Intermediate sanding (grain size)	320 - 400
Yield per pass	11 - 15 m²/l
Processing information	The substrate must be cleaned and degreased thoroughly with Hesse Glass cleaner. The proper preparation of the substrate is decisive for the adhesion of the lacquer.
Special notes	In case of back-varnishing of glass the inherent colour of the glass affects the subsequent colour tone and effect. If Hesse PU Mirror effect lacquer DB 46334-M0966 shall be used we recommend the application on white glass. Metallic lacquers must always be applied evenly. The application amount, application method and drying conditions affect the colour tone and the effect. If required, please make a test coating under practical conditions.

Procedure example

Object furnishing, textured glass

Surface preparation: thoroughly clean and remove grease from the textured glass using Cleaning thinner ZD 101

Coating: 1 x 60 - 80 g/m² PU Mirror lacquer DB 46334-M0966, mixing ratio (by volume) 25 : 1 with PU Hardener DR 4076-0002

Intermediate drying: 15 - 30 min / 20 °C

Use a gauze cloth with light pressure to clean spray mist from the surfaces

Top coat: 1 x 100 - 120 g/m² UNA-COLOR Glass colour lacquer DB 42105-1013, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and the addition of 5 -10 % Thinner DV 490 / DV 4900 to the lacquer/hardener mixture

Packable: after drying for at least 16 h / 20 °C.

Ready for assembly or gluing: after 5 d / 20 °C

Glass partition with antique effect

Surface preparation: thoroughly clean and remove grease from the glass using Cleaning thinner ZD 101.

Effect: spray Effect agent DZ 4992-05856 thinly onto the edges of the glass surface. Allow brief intermediate drying and then achieve the desired effect by dabbing it with a piece of dampened greaseproof paper. Then coat at 60 - 80 g/m² using PU Mirror lacquer DB 46334-M0966, mixing ratio (by volume) 25 : 1 with PU Hardener DR 4076-0002.

Intermediate drying: 15 - 30 min / 20 °C.

Use a gauze cloth with light pressure to clean spray mist from the surfaces.

Top coat: 1 x 100 - 120 g/m² UNA-COLOR Glass colour lacquer DB 42105-8004, mixing ratio (by volume) 5 : 1 with PU Hardener DR 4076-0001 and the addition of 5 -10 % Thinner DV 490 / DV 4900 to the lacquer/hardener mixture.

Packable: after drying for at least 16 h / 20 °C

Ready for assembly or gluing: after 5 d / 20 °C

General Notes / Disclaimer

Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.