PURA-NATURA HDE 54451
Light fast, dull matt and lightening HYDRO-PU Multicoat lacquer with outstanding chemical and mechanical resistance. The natural appearance of the wood is preserved despite its high protective effect. Low-emission and therefore also suitable for use in sustainable building projects (e.g. according to DGNB, BNB, LEED).
Enquire articlePage content
- Light-fast
- Dull matt with good scratch resistance
- Natural wood effect
Processing
- 2C line
Airless
-
Airless low pressure
Airmix
Compressed air spraying
Rolling
Spreading
Areas of application
For upscale interior fittings, store and timber construction as well as for kitchens/bathrooms and on surfaces subject to heavy wear, including doors, stairs and parquet. Can also be used on bleached surfaces (sufficiently dried).
Technical information
Sustainability data sheet
Certificates
Technical Specifications
| Proportion of renewable raw materials % | 0 % |
|---|---|
| Appearance | colourless |
| Decopaint base | wb |
| Decopaint category | J |
| VOC EU % | 6 % |
| Number of layers (max) | 2 |
| Quantity per layers (min) | 80 g/m² |
| Quantity per layers (max) | 100 g/m² |
| Total quantity applied | 200 g/m² |
| Mixing ratio (volumetric) | 10 : 1 | Hardener: HDR 5084 |
| Mixing ratio (gravimetric) | 100 : 10 | Hardener: HDR 5084 |
Processing Instructions
| Potlife | 3 h / 20 °C |
|---|---|
| Drying | 3 h / 20 °C |
| Due to hardening | 7 d / 20 °C |
| Surface sanding (grain size) | 120 - 280 |
| Intermediate sanding (grain size) | 280 - 320 |
| Yield per pass | 9 - 10 m²/l |
| Processing information | Once the hardener is well worked in, adjust thespray viscosity with up to 5 % water. Thehardener must always be added before thinningwith water! Never store product mixedwith hardening agent in closed containers. Recoatability: with itself following proper sanding. Clean tools with water. For removal of dried lacquer residues use Hesse HYDRO Cleaning agent HV 6917. In case of combined coatings (HYDRO- and solvent based lacquers) rinse application tools with Hesse HYDRO Reversing agent HV 6904. |
| Special notes | Greying may occur on dark woods or stains because of the light milky colour of the products.The maximum application amount in wet film when using this product as a coating material with low flame-spread characteristics complying with SOLAS 74 Reg. II-2/3, II-2/5, II-2/6 and X/3, as amended, IMO Resolution MSC.36(63)-(1994 HSC-Code) 7, IMO Resolution MSC.97(73)-(2000 HSC-Code) 7, IMO MSC/Circ. 1120, is 2 x 100 g/m². The coating with this product meets the requirements of abrasion class 2B according to DIN 68861 as well as the adhesive strength GT 0 according to DIN EN ISO 2409. |
Procedure example
Our technical information is continually adapted to keep up to date with the latest technology and statutory regulations. The latest version is always available online at www.hesse-lignal.de or talk to your local account manager. This information is for advice and is based on the best knowledge available and careful research in line with the current state of the art. This information cannot be held as legally binding. We also refer you to our terms and conditions of business. Safety data sheet is provided in accordance with EC regulation no. 1907/2006.
Request a series
<% headline %>
Your request for the article
PURA-NATURA HDE 54451Your request for the series
PURA-NATURA HDE 54451
